Jump to content
SAU Community

Recommended Posts

hungry6...have heard good things about CNJ motorsport as well (although I didn't go there)...

I was quoted $550 - $650 for tuning -> that is always only for full throttle tune and everyday economy WILL be crap. But most tuners can fix that up with road tuning, albeit for another $50 - $100.

they will all say heaps of time 'plugging in numbers with fussy h/c' (about $150 of cost)

If you want PM me you details and I can do base map with you.

Link to comment
https://www.sau.com.au/forums/topic/22299-power-fc/#findComment-478678
Share on other sites

It does...except the base maps (fuel and ignition) are quite far from idea (even more than the standard computer). E.g. at full load it runs as rich as 9.5:1...and you'll have difficulty getting more than 250km out of a tank.

Before taking it to a mechanic, you can fix most of the map so that the mechanic doesn't have to spend another 1.5 hrs changing the numbers to more ideal ones (which he will fine tune on a dyno anyway)...could save you some money

Link to comment
https://www.sau.com.au/forums/topic/22299-power-fc/#findComment-479857
Share on other sites

Hahaha.. Good one Wayne.

He pays us nothing to spread the word. He knows how to deal with customers and he knows his skylines. That's all I need. Customer satisfaction and a mechanic that knows what he's doing.

Best business is word by mouth. He doesn't like to blow his own horn.

Link to comment
https://www.sau.com.au/forums/topic/22299-power-fc/#findComment-484652
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
×
×
  • Create New...