S A F C set up question.

[Devo]

Hi all, a quick question here re set up on an safc blue screen model, not the latest.

When setting up the sensor type, after entering hotwire, do I enter 4 (my sensor type no, r33 gtst,) in both the IN and OUT fields, as I found the instructions a little hard to follw at this point.

Any clarification here would be appreciated.

Cheers

Harry

[Vovan]

i gues you can define your sensor type by voltage. it's described in docs. don't remember how.

[Devo]

Vovan, ta for your reply, I know the sensor is a hotwire type 4,

wot I want to know is do I enter that no. on the in and out of the sensor type menu.

cheers

harry:cool:

[Guest Robo's]

HW4 is shown on the APEXI website, i will change mine tonight as i put nothing on it, i think its shows In 1, Out 1. Do you put 4 and 4?

[Devo]

bump

[Guest Robo's]

Enter the 4 on IN and OUT

[Devo]

yup, thats wot I've done too, hope its right

cheers

Harry:cool:

[WHITE R32]

i was also wondering this... what is the effects of having the wrong number in this field???? and also the screen after that where is goes to the sensor cal screen where i think its for 2 afms etc.... do u just leave that at 1 and 1 also?????

[bbenny]

when i had the wrong number in the car idled like shit and would stall.

[pushead]

EXACTLY WHAT I WANTED TO KNOW!!!.. bumping this post.

The Apexi manual shows GTST R33 = HW4

So that means in the hotwire mode i enter in the IN field4 and the Out field 4 as well?

[Guest Robo's]

yep

[Bo0sT_JuNkY]

Originally posted by pushead

EXACTLY WHAT I WANTED TO KNOW!!!.. bumping this post.  

The Apexi manual shows GTST R33 = HW4  

So that means in the hotwire mode i enter in the IN field4 and the Out field 4 as well?

Thats right, It means Input from the AFM =4 Output to the ECU =4 .If you have a different AFM like a Z32 then it would be Input =3(just example number) Output =4 .So the safc converts the Z32 Afm to a Stock signal and the ecu doesnt notice the change.

[Devo]

Cheers BoOsT JuNkY, that is precisely wot I needed to know.

Cheers

Harry:cool:

[sil21jun]

download the setup manual from www.apexi.com

[WHITE R32]

i have the setup manual but it doesnt seem to explain the sensor type settings very well at all.... and also the screen after it... cant remember what its called...