Jump to content
SAU Community

Recommended Posts

Item: R34 GTR turbos with stock actuators

Age: 2000 model

Condition: excellent

Price: $790 for the pair

To Fit: (What car) Anything with RB26

Location: Sydney

Contact: Jerry via pm or email: [email protected]

Comments: excellent condition turbos , they were replaced with aftermarket . These are ball bearing and bigger than R32/33 turbos , the car they came off was running standard boost ( no boost controller )

I have a pair of N1 actuators if anyone wants them at additional cost .

Link to comment
https://www.sau.com.au/forums/topic/223185-r34-gtr-turbos-790/
Share on other sites

Do there still have a ceramic wheel like all the other turbos?

Same material as all standard GTR turbos dude.

jivlah : You can fit them on anything you want with the right exhaust manifolfd

Hey mate i thought that the N1 R34 turbos were steal wheel not ceramic?

Postage cost to Melb?

Cheers

I never said they are N1 Turbos, they are stock R34 GTR turbos ( came off a V-spec). I do have a pair of N1 ajustable actuators for additional cost if anyone wants them , use them and you don't need a boost controller

Post to melbourne metro, about $20 via Aussie post +rego and Insurance if needed about $10.

Item: R34 GTR turbos with stock actuators

Age: 2000 model

Condition: excellent

Price: $790 for the pair

To Fit: (What car) Anything with RB26

Location: Sydney

Contact: Jerry via pm or email: [email protected]

Comments: excellent condition turbos , they were replaced with aftermarket . These are ball bearing and bigger than R32/33 turbos , the car they came off was running standard boost ( no boost controller )

I have a pair of N1 actuators if anyone wants them at additional cost .

are they steal turbines

are they steal turbines

Here is a pic of them, they are stock V-spec turbos dude, I don't think any turbines are made from " steal", they are not stolen ...

post-5240-1215315825_thumb.jpg

post-5240-1215315837_thumb.jpg

I still have these ...

Hi Jerry...reading and interpreting the english language is somewhat difficult for some people.

guys these turbo's would be mint, good luck with the sale mate.

Hi Jerry...reading and interpreting the english language is somewhat difficult for some people.

guys these turbo's would be mint, good luck with the sale mate.

That's two that don't know the difference between 'steal' and 'steel' Paul , you wander what they learn at school these days .

For the ones that don't know the exhaust wheels are " inconel", a nickel-base alloy with chromium and iron, used in gas-turbine blades . Inconel alloys are typically used in high temperature applications, There are lots of different grades of this exotic alloy with different properties.

Inconel 600: Solid solution strengthened

Inconel 625: Acid resistant, good weldability

Inconel 690: Low cobalt content for nuclear applications

Inconel 718: Gamma double prime strengthened with good weldability

The above are some, probably lots more, not sure which one garrett use in the RB26 turbos.

When people refer to RB 26 turbos as 'ceramic' its incorrect they are not ceramic however when they smash they become tiny little pieces .

The so called steel wheel turbos , are not steel either, a magnet will not stick to them, some kind of alloy as well .

If anyone wants these temp me with an offer, even a silly one otherwise they are going on E-Bay, I don't feel like keeping themto do a swap in my car when time comes to sell it..

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...