Jump to content
SAU Community

Recommended Posts

I don't know what you mean by "the actual box of the seat belt..." ....

Perhaps posts some pics... if it's pulled all the way out, check for knots or anything that's preventing it from retracting... otherwise, the retracting mechanism inside the perhaps is stuffed?

Never done it myself, but if all of the above fails - open up the box where possible to see what's going on.

Link to comment
https://www.sau.com.au/forums/topic/223301-seatbelt-hassle/#findComment-3934115
Share on other sites

yes its pulled all the way out , and it isnt retracting, yeah thats what i mean the mechanism inside could be stuffed and i was wondering how i could get into that to check it out.

how do i get into that part do i have to remove the seats or what?

thanks for the help

Link to comment
https://www.sau.com.au/forums/topic/223301-seatbelt-hassle/#findComment-3938779
Share on other sites

im guessing your talking about the fron 2 seatbelts. if so i think the mekanism is inside the pillar, so take off the pillar and it should be bolted up in there, as for the back ones the same applies, cant remember if you need to remove the back seat. removing the pillars is easy, they just hold on by clips. be gentle you cant really go wrong.

Link to comment
https://www.sau.com.au/forums/topic/223301-seatbelt-hassle/#findComment-3954872
Share on other sites

If you have an R33, two bolts at the bottom then the bottom section of the seat slides out, you need to pull it a little bit up when you pull it out.

2 more bolts on the top section, this has to be lifted up for it to come out.

Link to comment
https://www.sau.com.au/forums/topic/223301-seatbelt-hassle/#findComment-3960839
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...