Jump to content
SAU Community

Recommended Posts

Sorry it's prob so easy for you guys but I don't know Nissans very well.

I would like to know if an RB24 (I'm Oz in Asia atm) long engine is basically directly interchangable with an Ozzie RB30. I am a mechanic and have done conversions before so little details don't bother me. Also what would be the guess of what 5 speed box would be behind it compared to the Oz version? If different box what about mounts and bulk?

My idea is I will be here for a while and would like to build a club racer here in my spare time, use the dead RB24 engine I found as a dummy then ship the rolling chassis back to Oz when I return and drop an RB 30 engine, hopefully, straight in.

Thanks Guys, appreciate your time.

Mark :-)

Link to comment
https://www.sau.com.au/forums/topic/224921-rb-24-rb-30/
Share on other sites

gearbox should bolt straight up, i believe the smaller RB motors and the RB30E use a ~9.5" flywheel and clutch to suit, it was the RB30ET that had the 10" and skyline boxes wouldnt clear the clutch properly

i dont know if your asking what box to use or if yours will fit, but im gonna guess you've got an RB20 box which will fail quite early on if driven hard. i dont see any point in just swapping to an RB30 bottom end, and the RB20 head doesnt really flow all that much more than the RB30's SOHC, you'd probly be better off just bolting in the RB30 providing you can get the loom adn ecu, unless the laws over there wont let you

Edited by VB-
Link to comment
https://www.sau.com.au/forums/topic/224921-rb-24-rb-30/#findComment-3962298
Share on other sites

Well RB24, is a RB20 stroked.

RB30/RB20 interchangeable without much effort.

Actually, it's the other way around. The factory Nissan RB24S (supplied in malaysia and a few other contries) has the stroke of an RB20 and the bore of an RB25, so it's more likely a short stroke RB25.

I would guess being a more economical engine and having less power than an RB20DE it would probably utilise the RB20 gearbox.

Link to comment
https://www.sau.com.au/forums/topic/224921-rb-24-rb-30/#findComment-3962357
Share on other sites

When most people say RB24, they are usually referring to a modified RB20. But even bored out to 82mm (from standard 78mm) and using RB26 crank, you only end up with 2.3litres. All of the other RB engines have a bore of 86mm, so using the 20crank you end up with 2.4litres. Then the 25, 26 and 30 engines are just larger stroked and different heads.

Link to comment
https://www.sau.com.au/forums/topic/224921-rb-24-rb-30/#findComment-3963394
Share on other sites

I can't speak to how accurate it is, but I found this info on the rb24S on wiki a while ago

RB24S

This is a relatively unknown engine, as it was not produced for the Japanese domestic market. These were fitted to some left hand drive Nissan Cefiros exported from Japan new. Mechanically it is made from an RB30E head, RB25DE/DET block and RB20DE/DET crank with 34 mm height pistons. This engine used carburretors instead of the Nissan ECCS fuel injection system. It is able to rev harder than the RB25DE/DET (as it has the same stroke as the RB20DE/DET) as well as being almost the same displacement as the RB25DE/DET. A common modification is to fit a twin cam head from other RB series motors while retaining the carburreted set-up. The standard single cam form produced 141 PS @ 5000 rpm and 20.1 kgf·m (197 N·m) of torque @ 4400 rpm.

Link to comment
https://www.sau.com.au/forums/topic/224921-rb-24-rb-30/#findComment-3963526
Share on other sites

Yeah, we kind of already discussed that. That is what a true RB24 is.

Modifying an RB20 block using different stoke and bore combination results in volumes between 2.1 and 2.3 litres.

...The factory Nissan RB24S (supplied in malaysia and a few other contries) has the stroke of an RB20 and the bore of an RB25
These were fitted to some left hand drive Nissan Cefiros exported from Japan new. Mechanically it is made from an RB30E head, RB25DE/DET block and RB20DE/DET crank with 34 mm height pistons.
Link to comment
https://www.sau.com.au/forums/topic/224921-rb-24-rb-30/#findComment-3965773
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...