Jump to content
SAU Community

Recommended Posts

Hi Everyone

We're conducting a High Performance Training and Track Driving Day at Sandown on Saturday 12th July 2008.

We will be running the day as an 'open pit lane' day, but we will also have 4 qualified (Certificate 3 and 4) instructors with lots of experience.

We also provide lunches, tea / coffee / soft drinks, flag marshals and medical / rescue crew.

Instructors on this day will include

Dean Canto V8 Supercar Champ

Darren Hossack Outright lap record holder at Sandown Audi Sports Sedan (1.08.53)

Dean Fiore Porsche Carrera Cup star

You do not need a CAMS or ASSA licence to participate in our High Performance Training and Track Driving Days

The format we run to is: 3 groups of 15 drivers, twenty minutes of track time per hour.

Start time is 8.30 am for safety briefing, track is open from 9.00 am until 4.00pm

Cost is only $245.00 per driver.

No other discounts will apply to this course

If you would like to come along please give Tessa a call on 1300 652 693

or email her [email protected]

Kind Regards

Kev

Link to comment
https://www.sau.com.au/forums/topic/224970-trackday-sandown-saturday-12th-july/
Share on other sites

Guys

Unfortunately we wont be joined by Darren Hossack and Dean Fiore as instructors at this trackday as they are both away racing.

Instead we will have working as instructors for your education and enjoyment..

Dean Canto twice V8supercar Konica champion

Adam Macrow 1998 Australian Formula Ford Champion and 2005 Konica V8supercar champion

Dave Reynolds 2007 Porsche Carrera Cup Champion

Luke Youlden 2000 Australian Formula Ford Champion and V8 Supercar star

Hope to see you at Sandown next Saturday 12th July

Call Tessa on 1300 652 693 to book your spot.

Kind regards

Kev

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...