Jump to content
SAU Community

Recommended Posts

Hi all,

I'm still learning my ways around my GTR and am wondering if it's a good idea to reset the ECU now that the car is in Australia. I'm thinking that would good to do due to the higher altitude (I live at 600m above sea level - higher than where GTR came from), the poorer fuel RON count, the different temperatures and also the pod filters etc...

...and much more that I'm probably not aware off haha!

Are these some good points for doing a reset?

I take it that, from other posts, that all you need to do is to disconnect the battery and then bleed any remaining power from the system by stomping on the anchors a couple times (as opposed to waiting 24hrs).

I also read that when you reconnect the juice you should then drive the GTR nice and hard through it's paces so that it learns the engine well. What sort of driving should I be doing? Gears, max rpms....speed???

Also, should I do it on a cold or hot engine as I like to let the car idle for a minute or longer on cold mornings (4 degrees at the momment)

Please advise ;-)

Cheers,

Tom

Link to comment
https://www.sau.com.au/forums/topic/225415-r33-gtr-ecu-reset/
Share on other sites

Damn that's not good...and that was entirely caused by the Japanese original tune that only suited it's life in Japan? Ok, well I might get onto one of the local tuners here and see what they can do...I'm not sure if simply disconnecting the battery is a bit rough haha!

If your ECU is only a factory one, u wont need to get your fuel mapped etc . As its essentially non programmable. Just reset the ecu , the eCU will self learn with the new environment. If you want put it on a dyno to get a base power figure, so that you can compare it to your future mods.

DLOOOK, yeh I thought as much. Do I need to do something with the steering as well...like this full left to right lock etc etc? Or can I just drive off with it and it'll do the rest as I go? I probably should have reset the thing a while ago!

Ok thanks!

Nope, mine has no mods at all...it just has a set of mags and that's it haha! I ended up in court with my GTST so I just left the GTR stock. It doesn't even have an exhaust =P

Yep, they probably did have it disconnected but doesn't it take almost a day or so for the juice to drain out of the system leaving the ECU with a blank slate? I'll see how it goes anyway.

(that's without pumpin the brakes etc)

Hmm dunno about the pic...I don't know if the moderators let you put up pr0n :D

...that's mine in the avatar.

Edited by tommis85

Yeah true, resetting the ecu will make it adapt to the new fuel, but, if you car by chance has a piggy back chip on it that was installed in Japan, like mine, then you will want to get it dissabled and get everything checked so you can be sure that your freshly reset ecu wont be controlled by a nasty Jap Chip.

Edited by steven22

Hi Steven, would this chip be visible as in being plugged in along side it or is it hidden inside the ECU, integrated with the circuitry? I might crawl in their and have a look first. Mine was 100% stock when it came over...it only had a turbo timer in it and that's it. It has proven genuine k's and also nothing in the engine bay was changed for when it came over ie. pod filters replaced with airbox for compliance etc.

Yeh, I'm thinking it will be best for aussie fuel and the altitude (lower air pressure / lower density for AFM to read and mix etc) I live at - should be most noticeable in those areas.

Does your GTR have the Nissan smoke screen feature when you drive *enthusiastically* ??

Dan, haha yeh just the richness mate. They run immensely rich don't they? It would be interesting to see what sort of millage they have when you up it.

I actually do have another little problem but I might put it up in a new post - it's also what made me start thinking about resetting the ECU. I'll put a link in here for it when I post it up for you guys.

Edited by tommis85

Ah ok man....well, perhaps it would be better if I let my mechanic have a look at it so that I don't bugger something up? See what happens I guess....it shouldnt be too bad hehe - why would they chip my totally stock GTR?

Are you referring to one of those gay 30hp chips that people fall for and get installed in their commies?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I sense an out of control build thread coming up lololol. That 450kW goal will end up being 600 to 700kW LOL.
    • Nice, thanks for sharing your progress....that's a pretty long list you are putting into it!
    • Decided to upgrade my pressurised plastic coolant expansion tank for a fancy pants alloy version The OEM versions can get brittle, even the new plastic one I got when I first got the car is a starting to show signs of "stress" I wasn't cheap, but it is basically unbreakable
    • Morning all, I have an RB25DET Neo that's in need of a rebuild. Will need new pistons etc due to detonation damage. Would anyone be able to recommend a shop in Southeast Queensland who I could bring my long motor to for a rebuild? Just want someone who knows RBs and whos built a bunch of them before. TLDR - recommended engine shops for RB rebuild.
    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
×
×
  • Create New...