Jump to content
SAU Community

Recommended Posts

Hi all,

I'm still learning my ways around my GTR and am wondering if it's a good idea to reset the ECU now that the car is in Australia. I'm thinking that would good to do due to the higher altitude (I live at 600m above sea level - higher than where GTR came from), the poorer fuel RON count, the different temperatures and also the pod filters etc...

...and much more that I'm probably not aware off haha!

Are these some good points for doing a reset?

I take it that, from other posts, that all you need to do is to disconnect the battery and then bleed any remaining power from the system by stomping on the anchors a couple times (as opposed to waiting 24hrs).

I also read that when you reconnect the juice you should then drive the GTR nice and hard through it's paces so that it learns the engine well. What sort of driving should I be doing? Gears, max rpms....speed???

Also, should I do it on a cold or hot engine as I like to let the car idle for a minute or longer on cold mornings (4 degrees at the momment)

Please advise ;-)

Cheers,

Tom

Link to comment
https://www.sau.com.au/forums/topic/225415-r33-gtr-ecu-reset/
Share on other sites

Damn that's not good...and that was entirely caused by the Japanese original tune that only suited it's life in Japan? Ok, well I might get onto one of the local tuners here and see what they can do...I'm not sure if simply disconnecting the battery is a bit rough haha!

If your ECU is only a factory one, u wont need to get your fuel mapped etc . As its essentially non programmable. Just reset the ecu , the eCU will self learn with the new environment. If you want put it on a dyno to get a base power figure, so that you can compare it to your future mods.

DLOOOK, yeh I thought as much. Do I need to do something with the steering as well...like this full left to right lock etc etc? Or can I just drive off with it and it'll do the rest as I go? I probably should have reset the thing a while ago!

Ok thanks!

Nope, mine has no mods at all...it just has a set of mags and that's it haha! I ended up in court with my GTST so I just left the GTR stock. It doesn't even have an exhaust =P

Yep, they probably did have it disconnected but doesn't it take almost a day or so for the juice to drain out of the system leaving the ECU with a blank slate? I'll see how it goes anyway.

(that's without pumpin the brakes etc)

Hmm dunno about the pic...I don't know if the moderators let you put up pr0n :D

...that's mine in the avatar.

Edited by tommis85

Yeah true, resetting the ecu will make it adapt to the new fuel, but, if you car by chance has a piggy back chip on it that was installed in Japan, like mine, then you will want to get it dissabled and get everything checked so you can be sure that your freshly reset ecu wont be controlled by a nasty Jap Chip.

Edited by steven22

Hi Steven, would this chip be visible as in being plugged in along side it or is it hidden inside the ECU, integrated with the circuitry? I might crawl in their and have a look first. Mine was 100% stock when it came over...it only had a turbo timer in it and that's it. It has proven genuine k's and also nothing in the engine bay was changed for when it came over ie. pod filters replaced with airbox for compliance etc.

Yeh, I'm thinking it will be best for aussie fuel and the altitude (lower air pressure / lower density for AFM to read and mix etc) I live at - should be most noticeable in those areas.

Does your GTR have the Nissan smoke screen feature when you drive *enthusiastically* ??

Dan, haha yeh just the richness mate. They run immensely rich don't they? It would be interesting to see what sort of millage they have when you up it.

I actually do have another little problem but I might put it up in a new post - it's also what made me start thinking about resetting the ECU. I'll put a link in here for it when I post it up for you guys.

Edited by tommis85

Ah ok man....well, perhaps it would be better if I let my mechanic have a look at it so that I don't bugger something up? See what happens I guess....it shouldnt be too bad hehe - why would they chip my totally stock GTR?

Are you referring to one of those gay 30hp chips that people fall for and get installed in their commies?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...