Jump to content
SAU Community

Recommended Posts

Hi

my left headlight is playing up and bascially wont come on.

its been doing this a for a lil while now and i usually give it a tap and all is good :D

but last night it hasnt seem to come on at all.

i looked at just jap to see about getting some nice brand new one's

but was stunned to see they want $1200!!!!! ;)

atm im just going to take the head light off to check the wiring hasnt come loose or the bulb has blown.

but assuming i got new headlights with the new bulbs... is there anywhere cheaper then just jap??

Link to comment
https://www.sau.com.au/forums/topic/226089-r33-sii-headlight-issue/
Share on other sites

If its not a blown globe..

Does your hi beam on the lhs work? if not its most likely your headlight switch (in cabin indicator/ headlight switch) there like $80 from just jap or $40 from the fs section of the forum.

If you really want to change your headlights, try yahoo japan they have brand new ones pop up every now and then.

If its not a blown globe..

Does your hi beam on the lhs work? if not its most likely your headlight switch (in cabin indicator/ headlight switch) there like $80 from just jap or $40 from the fs section of the forum.

If you really want to change your headlights, try yahoo japan they have brand new ones pop up every now and then.

yeh my hi beam works still.

atm still figuring out how to take off head light off as there is a tight squeeze to check

You will have to take the front bar and grill off, there is a couple of 10mm bolts at the back, on top of the light and one on the inner guard.

bit of a mission but got front bar off and the headlight off...

as suspected it was a blown globe.

so where would everyone reccomend to go to get a replacement? would super cheap or autobahn be fine?

also interested as to how to remove the black plastic mud flap things am i suppose to just hammer the pop screws ??

Edited by Greddy Skyline

figured out how to get the pop screws out.

i also rung up Nissan Southport and they wanted $680 EACH!!! omg i thought just jap were pricey

anyway now im just after a globe to replace current ones

anyone have any recommendations.

Take the bulb into repco or autobarn and ask for a replacement.. from memory there H3 but dont quote me on that..

Phillip Diamond vision are awesome, but pricey.. $50 a set of 2.

i was thinking about getting this HID kit

http://www.skylinesaustralia.com/forums/Hi...Globe&st=80

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...