Jump to content
SAU Community

Recommended Posts

complete rb25det

rb25 head with lifters and valves still untouched$450

rb25 block $450

power steering pump $50

A/C compressor $100

rocket covers both $50

camshafts intake and exhaust $100

intake manifold comes with injectors, anything that bolts onto it $150

exhaust manifold stock $50

cross over pipe with stock bov $50

flywheel still in good condition can give clutch as well for

free still in pretty good condition $100

timing covers and coil pack covers $80

throttle body $50

ecu $100

alternator $ 60

wiring loom $ 120

o2 sensor $ 30

engine mount brackets no rubber $30? for both

stock dump pipe $10

r32 turbo $100 if u want u can see what its like before i take it off and put the r33 one on

PLEASE LET ME KNOW IF IM ASKING FOR TOO MUCH CAUSE I REALLY DONT KNOW OF HOW MUCH EVERYTHING WOULD GO FOR, THAT WAS JUST AT STARTING PRICE FROM WHAT I SAW ON OTHER PEOPLES POSTS SO JUST OFFER, IM EASY WITH EVERYTHING.

basically anything u want from an rb25 engine,

the only thing i kept was the turbo,crankangle sensor and coilpacks

theres more that i have missed so just ask and ill tell you if i have it or not

i bought this motor with the intention of building it up again to put into my car but i had

a little accident so need funds to fix up my bodywork.

thank you for your time

can sell as whole for a cheaper price if u want.would prefer it this way saves the hassle.

Location; melbourne south east

contact; pm or 0412-219-552 email is the [email protected]

Link to comment
https://www.sau.com.au/forums/topic/226315-complete-rb25-motor/
Share on other sites

is it all in pieces? series 1 or 2?

anyting missing?

cheers

umm i think its a series 1.

i took the turbo, coilpacks and cas.

if i can get the wiring loom ill chuck that in.

the only thing i can think of that is missing is prbly some pipes, here and there, and the brackets that hold the cams down which i am currently trying to look for now. somewhere in the workshop

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...