Jump to content
SAU Community

Recommended Posts

Thought i would post in this topic instead of starting a new one, got a dyno run done today, just wondering if my afr's are too rich as they drop off to 11 as i hit 14psi then climb back up to 12 as the boost drops to 13psi.

How much power would you like?

If under 300hp(220kw) you need fuel pump and evc or boost guage for check boost.

If you want to power over 300hp you need Z32 AFM befor remap.

Since i am making 223rwkw im guessing im maxing out the standard afm, also still running the standard injectors, ecu and fuel pump, obviously not running out of fuel tho.

post-27276-1225712511_thumb.jpg

Edited by W0rp3D
Thought i would post in this topic instead of starting a new one, got a dyno run done today, just wondering if my afr's are too rich as they drop off to 11 as i hit 14psi then climb back up to 12 as the boost drops to 13psi.

Since i am making 223rwkw im guessing im maxing out the standard afm, also still running the standard injectors, ecu and fuel pump, obviously not running out of fuel tho.

post-27276-1225712511_thumb.jpg

i think my ecu is tuned for about 11.5-11.7. you can go a little leaner but its not really worth it in a street car, and im running a fair bit of ignition advance.

11 is a tad rich, but its better to be rich than lean! 223rwkw is quite impressive assuming youre using an RB25 in a gtst (i forgot to check this). you should consider upgrading your fuel pump at the very least. injectors are fine up to about 240rwkw i am told. z32 afm is recommended if you want anymore power. i can refer you to a bloke who does standard ecu remaps for about $650-700. i found it was well worth it, good power and response gains.

i think my ecu is tuned for about 11.5-11.7. you can go a little leaner but its not really worth it in a street car, and im running a fair bit of ignition advance.

11 is a tad rich, but its better to be rich than lean! 223rwkw is quite impressive assuming youre using an RB25 in a gtst (i forgot to check this). you should consider upgrading your fuel pump at the very least. injectors are fine up to about 240rwkw i am told. z32 afm is recommended if you want anymore power. i can refer you to a bloke who does standard ecu remaps for about $650-700. i found it was well worth it, good power and response gains.

Yeah is an r33 rb25det, i have a set of injectors, z32 afm and power fc for it, gotta get the injectors cleaned and checked before i put them in, was told there 650cc but cant find any info on them, still have to get a new fuel pump then i will get it all tuned, the turbo i have is only good for about 250rwkw so theres not much left in this set up.

Yeah is an r33 rb25det, i have a set of injectors, z32 afm and power fc for it, gotta get the injectors cleaned and checked before i put them in, was told there 650cc but cant find any info on them, still have to get a new fuel pump then i will get it all tuned, the turbo i have is only good for about 250rwkw so theres not much left in this set up.

650cc is pretty big. but yeh 250rwkw is pushing the stock motor anyway. its pretty serious power in a rwd.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...