Jump to content
SAU Community

Recommended Posts

anyone know y i would be hitting 14psi @about 4500-5000rpm??

would a split dump help?

well from the few dyno sheets ive seen with this turbo on a rb20, they seem to hit about 17psi around at around 110km/h. one chart with a rb22 was hitting that boost at 100km/h.

i dont know what revs that is i assumed 4000 to 4500? 5000revs seems a bit high?

back of the block water line is a mungrel to get too...

ok one more question whats the go with these 2 water lines that branch off the steel water line from the turbo?

the line from the turbo is in the bottom right hand corner & the 2 rubber hoses connect to the steel tee piece from the turbo.

Photo587.jpg

does the braided line in the kit have a tee piece as well to connect to these 2 hoses?

nope 3 lines! 1 to the back of the block and two too turbo side of engine!

3 water lines? nah there should be 2 from the turbo, one goes to the front of the motor somewhere & the other one (which is what im asking about) goes to the back of the head

so i know theres one water line that goes to the back of the engine/head but how does it connect to TWO water lines?

does the kit supplied braided water line have a tee? or can you connect to 1 hose & blank off the other one (thats at the back as well) ?

  • 8 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
    • To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
    • I use FCC car launcher. It has an option for different backgrounds, so instead of turning the screen off you can swipe 'up' to a black screen with no background/icons. (mine has the time on it only). It's kinda nice. Also lets you use gestures to say swipe to go to next song, etc.  
×
×
  • Create New...