Jump to content
SAU Community

Recommended Posts

items

rb26dett long motor comes with head still bolted to genuine 60000km bottom end came out of a crashed 32gtr. doesnt have cam covers etc nor sump just long motor.

$2000

r33 gtst power fc with hand controller used in car for 12 months. $1000

rb25det long motor comes with everything except auxillary parts eg manifolds and coils. p.s engine has 160k on it wen pulled from car so good for rebuild $800

turbosmart progate 48mm blue. used on car for 12months have gotten a new gate to use on new engine $450

genuine greddy plenum to suite rb25det . $600

standard r33 gtst plenum with throttle body. $250

sard 650cc injectors to suite rb25det comes complete in fuel rail. just bolt onto ur engine and tune accordingly and away u go. $500

gtr front diff... out of a r32 gtr. make an offer

standard gtr plenum and itb setup. no sensors. make an offer

17 inch advanti rpms mag wheels to suite skyline. make an offer

standard r33gts-t radiator make and offer

all parts are negotiable on price and can be freighted to buyer at buyers expense.

pm me for details

Edited by skylinekid
Link to comment
https://www.sau.com.au/forums/topic/227109-gtr-and-gtst-parts/
Share on other sites

ok ppl to clarify for sum of u not so knowledged ppl out there the rb26 plenum and throttles are seperate from the part that bolts to the head that part that bolts to the head is not for sale with items listed. thnx

no pics of rims..... but they are still brand new i only had them on the car for 6 months..... just look the net for them... ne one interested i will get pictures for them...

rb26 has now been seperated due to bottom end being sold..... head is still available note doesnt come with ne of the intake side and or valve covers but comes with exhaust manifolds.... make an offer and we'll go from there

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...