Wtf

[skyl1ne r33]

hi there i dont think any one will know but why would my skyline just randomly start up?????????????????????

i have disconnected battery so it doesnt do it again.

thanks

martin

[mr moo]

does it have a remote start alarm. maybe you hit the button

[skyl1ne r33]

nope it dont have that.

[Primordial]

Ghost car... Common problem. Contact your local church for exorcism and ECU reset.

[skyl1ne r33]

primordial how simple is it to do an ecu reset??

thanks

[mr moo]

take the battery off and leave off for 24hrs

but sounds like you have an electric short some where. might be best to take it to an auto electrician

[Cassbo]

primordial how simple is it to do an ecu reset??

thanks

This is how I reset the ECU on my Subaru. I image the same will work. Its not the proper way to do it, but its by far the simplest. Its the simplest because I don't remember the other way.

How to reset the ECU, battery dance styles.

NOTE: Do this on a "cold" engine. Leave it sit overnight and do it in the morning.

1. Disconnect the negative battery terminal cable for 45-60 minutes.

2. Reconnect the negative battery terminal cable.

3. Turn off all your accessories.

4. Start the car, but DO NOT touch the throttle at all.

5. Let the car idle for 10-15 minutes, or until the car is at normal operating temperature. Again, do not touch the throttle.

6. Turn the ignition key to the "OFF" position. That's it.

[skyl1ne r33]

thanks for ur help i got battery off now to stop it doin it again over nite. its only the first time its done it that i no of.

[madevo3]

ats some weird shit man. but going to a church and praying would be good lol. na take it to auto electrician to check it out

[Primordial]

primordial how simple is it to do an ecu reset??

thanks

take the battery off and leave off for 24hrs

but sounds like you have an electric short some where. might be best to take it to an auto electrician

Yeah as Mitch said - your best bet is to contact an auto electrician.

There's almost no way the ECU can decide to start the car itself... its an electrical circuit that is most likely shorting somewhere and starting the car... Just thinking though, how could the car possibly have run the starter motor for the specific amount of time needed to start the car? If it was properly shorted it would have grinded the starter motor into oblivion when the car started and the starter kept going..

Very odd problem!

[skyl1ne r33]

yer very true i just had a quick look at sum stuff on car and the turbo timer is not a turbo timer its wats left of a remote start alarm but only ignition loom runs through it no extras.and its all jap writein so dont have a clue wat its set on. i also droped hand break 2 kill it and it stoped i traced one wire 2 nand break switch.

Edited July 23, 2008 by skyl1ne r33

[Zilch*]

yer very true i just had a quick look at sum stuff on car and the turbo timer is not a turbo timer its wats left of a remote start alarm but only ignition loom runs through it no extras.and its all jap writein so dont have a clue wat its set on. i also droped hand break 2 kill it and it stoped i traced one wire 2 nand break switch.

That hurt my head to read and I still don't understand it

[Sheng]

Ghost car... Common problem. Contact your local church for exorcism and ECU reset.

Bah!

You just missed the pope

yeah try to reset the battery

[Abo Bob]

yer very true i just had a quick look at sum stuff on car and the turbo timer is not a turbo timer its wats left of a remote start alarm but only ignition loom runs through it no extras.and its all jap writein so dont have a clue wat its set on. i also droped hand break 2 kill it and it stoped i traced one wire 2 nand break switch.

Well it sounds like you're onto it now anyway. Get it removed. It's probably more of a security risk than a help.

[mr moo]

yer very true i just had a quick look at sum stuff on car and the turbo timer is not a turbo timer its wats left of a remote start alarm but only ignition loom runs through it no extras.and its all jap writein so dont have a clue wat its set on. i also droped hand break 2 kill it and it stoped i traced one wire 2 nand break switch.

whatever you do, do not cut the handbrake wire, unless you know how to remove that alarm, and get the car sorted. ( cutting the wire will disable the car and you won't be able to start it. had this on my old car took me ages to find)

if not take it to an auto electrician, or call a Mobile alarm guy and they should be able to take it out.