Jump to content
SAU Community

Recommended Posts

The list of good and bads of GTST and GTR R32 and R33

GTST

R32

The Good- Looks good for its age, lots of aftermarket support, good overall package, RB20 unburstable(depending on tune and use)

The Bad -Starting to get a bit old, RB20 lacks torque, rear seats not much room for 6 footers, gearbox weak, aftermarket bodykits have to match the already good styling as most dont suit the styling and era of the 32 (same with R34)

R33

The Good-More room inside than 32, has one of the strongest gearbox from Nissan, lots of good examples around, most bodykits look good and them, more practical, bigger brakes, RB25 has more torque and quite strong...

The Bad -...if you can keep it below 400HP or 300KW because the RB25 is actually the most fragile compared to the 20( RB20 can handle 600HP with stock internals) and 26(RB26 can handle between 400-600HP), duller interior compared to 32 but exterior is personal preferance, slightly heavier

GTR

R32

The Good- The car that started it all, good looking, 13 sec on the quarter mile dead stock, scares people in normal cars, recently became more affordable than before, wheel-base large enough for fatter rubber, no airbags on all models mean easy steering wheel swap

The Bad- expensive to fix when they let go( at 17 years old, most do unless taken care of well), same aftermarket bodykit issues with GTST but the GTR already looks good enough, Brembos only came in V-SPEC II, ATTESSA ETS 4WD system has the slowest update with more track-oriented handling so its not best for beginners

R33

The Good- Looks at least better than GTST with the pumped out guards, Brembos on all models, seats more improved and more comfortable than even the R34 GTR especially on long drives, as usual more room than R32, ATTESSA ETS easier to control than 32 GTR and more practical

The Bad- heavy styling match the scales: heavier than 32 GTR and surprisingly slightly slower than R32 in a straight-line, compared to the R32 interior is still duller, handling although more user-friendly is actually slightly duller for more experienced drivers and racers, Active LSD only available in V-Spec models, airbag wheel ugly

Edited by R33_NICK
  • Replies 177
  • Created
  • Last Reply

Top Posters In This Topic

The Bad -...if you can keep it below 400HP or 300KW because the RB25 is actually the most fragile compared to the 20( RB20 can handle 600HP with stock internals) and 26(RB26 can handle between 400-600HP), duller interior compared to 32 but exterior is personal preferance, slightly heavier

wait what?

should we all change to rb20's then?

handle 600hp as in 1 dyno run?

i have a r33 but quite like the look of the r32 but the dash in the r32 is what put me off buying man so old school . oh yeah plus the bigger brakes / bigger motor /stronger box might have swayed me too the r33 as well lol.

like someone said you can put lipstick on a pig but it's still a pig im sure they was talking about the r32 lol

Edited by mid life crisis
wait what?

should we all change to rb20's then?

handle 600hp as in 1 dyno run?

depending on how much mods you put in and whether the tuning is done right which most usually dont and at that power level the engine is sure to let go soon as well. RB20s lack torque so usually if you add power, more torque will be sacrificed so you'll still end up getting a bigger engine and at that power level most would prefer a rebuild just incase and if so, you might as well rebuild a 25 since it already has more torque and with forged pistons etc..., the strength is not much different to the 20 or any forged internal engines so most will be leaning towards the 25, 26 if you have extra cash or 25/26 30 combo if you can stretch it out more.

depending on how much mods you put in and whether the tuning is done right which most usually dont and at that power level the engine is sure to let go soon as well. RB20s lack torque so usually if you add power, more torque will be sacrificed so you'll still end up getting a bigger engine and at that power level most would prefer a rebuild just incase and if so, you might as well rebuild a 25 since it already has more torque and with forged pistons etc..., the strength is not much different to the 20 or any forged internal engines so most will be leaning towards the 25, 26 if you have extra cash or 25/26 30 combo if you can stretch it out more.

any links to any rb20s that run 600hp on a standard bottom end?

day in day out for more then 6 months?

The list of good and bads of GTST and GTR R32 and R33

GTST

R32

The Good- Looks good for its age, lots of aftermarket support, good overall package, RB20 unburstable(depending on tune and use)

The Bad -Starting to get a bit old, RB20 lacks torque, rear seats not much room for 6 footers, gearbox weak, aftermarket bodykits have to match the already good styling as most dont suit the styling and era of the 32 (same with R34)

R33

The Good-More room inside than 32, has one of the strongest gearbox from Nissan, lots of good examples around, most bodykits look good and them, more practical, bigger brakes, RB25 has more torque and quite strong...

The Bad -...if you can keep it below 400HP or 300KW because the RB25 is actually the most fragile compared to the 20( RB20 can handle 600HP with stock internals) and 26(RB26 can handle between 400-600HP), duller interior compared to 32 but exterior is personal preferance, slightly heavier

GTR

R32

The Good- The car that started it all, good looking, 13 sec on the quarter mile dead stock, scares people in normal cars, recently became more affordable than before, wheel-base large enough for fatter rubber, no airbags on all models mean easy steering wheel swap

The Bad- expensive to fix when they let go( at 17 years old, most do unless taken care of well), same aftermarket bodykit issues with GTST but the GTR already looks good enough, Brembos only came in V-SPEC II, ATTESSA ETS 4WD system has the slowest update with more track-oriented handling so its not best for beginners

R33

The Good- Looks at least better than GTST with the pumped out guards, Brembos on all models, seats more improved and more comfortable than even the R34 GTR especially on long drives, as usual more room than R32, ATTESSA ETS easier to control than 32 GTR and more practical

The Bad- heavy styling match the scales: heavier than 32 GTR and surprisingly slightly slower than R32 in a straight-line, compared to the R32 interior is still duller, handling although more user-friendly is actually slightly duller for more experienced drivers and racers, Active LSD only available in V-Spec models, airbag wheel ugly

lol

fact or fiction?

^ fact i guess lol nah got some info from HPI mag and most from what i know tho im not sure about the RB20 part but i remember seeing on the magazine that they say the RB20 are strong things and MIGHT do 600 with the right tuning. i think someone here on the forum has an RB20 with 400 HP with stock internals.

HPI Mag?

Whats that?

Is it a ricer mag , because it's comparison info mentioned above is like the ramblings of a know nothing.

hpi = high performance imports

quite a nice mag... =)

hpi = high performance imports

quite a nice mag... =)

I've never got into car mags.

Too busy with actual cars.

My tip is if you want to know something about cars then don't start or finish with a magazine. There are better places to learn things. :)

I've never got into car mags.

Too busy with actual cars.

My tip is if you want to know something about cars then don't start or finish with a magazine. There are better places to learn things. :)

lol.

goood toilet reading man.

cant work on cars in the toilet :ermm: haha ;)

and the fact i work part time in newsagency means access to free magazines :)

Edited by br3ndan

The problem with HPI is that they keep going on about 1000hp street cars.

Noone drives a 1000hp car as a daily, no matter what they say, and if they do they are idiots.

"Yes i do enjoy my OS Giken triple plate, its very easy to use and has no problems at all" :wave:

Hya, iv had my R32 sky with approx 250rwhp for a couple of months now.. and basically Im bored of the power, I want more. I love the car, dont love the lag.

Are 33's worth it over the 32? or more to say is the 25 any quicker of the 20. I cant afford a GTR at this stage but im wanthing something I can get power out of easier without feeling im being too hard on the motor.

but yeh feed back on what you think of your 33 and even would love to hear comparisons of what people think who have driven both

cheers

Get another car man.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...