Jump to content
SAU Community

Recommended Posts

post-34523-1217585562_thumb.jpgLate 1990 GTR Extra Tidy Show quality paint, Well serviced, Low KLM 72000, 33 GTR Alloys, Tein suspension, Oil cooler, brake upgrade, new tyres & extra clean all round. Ideal for someone you doesn’t want to pay for re-spray or engine rebuild, hard work complete just enjoy

Hi Late 1990 32 GTR: Imported as personal import. I had a couple of guys looking for me in Japan with the brief of low klm, not thrashed and in excellent condition. One of the brokers that I got a couple of cars from previously had a family member that purchased a GTR from his uncle. I requested a Black Metallic one as well just to differentiate from the common Gun Metal Grey and rental car White. The car is still under 72000klm, I know you can’t always trust the klm but the odometer all lines up. Like anyone I go by the interior, compression, driveline and my mechanic always raves that it’s the tightest Skyline he has driven in years. Basically I didn’t want a car that had been thrashed that I would have to deal with the high maintaince costs and repairs, I have had huge bills before and I would prefer to pay the extra cash as it saves in the long run. * I am big on servicing and prevention and I give priority to having the car tidy.

Body & Paint: The car came over in good condition but like all cars it had lost its gloss. Being a bit fussy I got a complete respray as I wanted the car to be in show condition especially if I was going to be keeping it for a long time. I got a professional with a good reputation to complete the job as they do a lot of show cars. At the same time I got electronic aerodynamic side mirrors to modernise the car and the front lip painted to match the car. As well I got the guards rolled front and back to fit bigger wheels and tyres without scrapping and to allow the car to be lowered with coil over’s. * Under the car is extra clean with no surface rust or dings on chassis. I have previously seen a lot of imported cars with heavy marking from transport and jacks.

Suspension & Handling: I went TEIN for the lower control arms and for the coil over’s due to availability for maintanice in the future. I had the suspension guys set the coil over and alignment for street and touring. Overall it’s a tight set up for driving as a daily driver and for tight cornering. Polished front strut bar for stability. Extra Info: 1. removes the deflection at the joint from high cornering loads 2. Provides adjustability of the front track, giving greater clearance between the chassis and wheels (Only recommend 20mm per side) 3. Changes the lean angle of the front shocks by moving the front hubs outwards, reducing roll angles and effectively creating a camber increase

Wheels: I went the classic 33 GTR wheels that are pretty timeless and because I wanted genuine Nissan look. Unfortunately I paid for them when they where still expensive but they are worth it. For tyres I went the low profile Silica compound and they have only done about 2000klm very fresh and sticky.

Interior: We looked for a car that had not been lived in. I have kept it genuine even with the original stereo, pretty rare these day but it’s the only one that sits flush with out gaps. I had the interior steamed cleaned just too fresh it up. Overall the interior in great condition from what you would expect with low KLM’s. I have had the split controller hidden in the console with all hidden wiring.

Engine: Extra fresh engine to protect the engine the first thing I got done was a complete flush and then replaced the oil and flushed again. New oil cooler mounted in the front to maintain oil quality, reduce temperature & wear. Oil filter relocated fitted to make it easier to change filter and drain oil. Car has never been boosted as it’s not what I wanted when tracking it down or what I need. Split controller was recently fitted to enable different torque setting, very useful in the wet as it makes the car handle like its driving in the rain. The controller also enables the car to be switched from 4 to 2 wheel drive, HKS Air filters and extensions have been fitted. # Engine bay, as you can see from the pictures the engine bay is in great condition with not the usual scratches and dings. Instead of the boring flat black engine bay the engine covers have been sand blasted and painted with the Red 34 GTR colours.

Engine Servicing: Oil pressure sensor replaced &a full set of NGK Iridium plugs. Coolant flushed by Red devil Radiators & replaced with Genuine Toyota Timing Belts/Bearings Timing Belt Idler & Tension Bearing, Tensioner Spring, Cam Seals & Front Main Seal. Water pump. Nismo Reinforced Engine Mounts. By increasing the hardness of the rubbed used in the mount bush, it help to protect the engine from damage. Engine vibration is also reduced during acceleration and deceleration. Overall it improves accelerator response, shift feeling and cornering performance. Exhaust 3 inch Turbo back stainless exhaust with high flowed N1 catalytic converter.

Braking: Stainless steel brake lines to reduce wear and increase consistency. Upgraded front disks and new high quality pads all around. All Callipers have been painted 34 GTR Red to match engine.

Price $22950 Yes there are cheaper but you they are usually thrashed and will require engine rebuild, body work and paint to bring them up to scratch. Feel free to call and discuss. Regards Boyd 0408 188 777

post-34523-1217586194_thumb.jpg

post-34523-1217586294_thumb.jpg

post-34523-1217586402_thumb.jpg

post-34523-1217586490_thumb.jpg

post-34523-1217586979_thumb.jpg

Edited by GGG
post-34523-1217585562_thumb.jpgLate 1990 GTR Extra Tidy Show quality paint, Well serviced, Low KLM 72000, 33 GTR Alloys, Tein suspension, Oil cooler, brake upgrade, new tyres & extra clean all round. Ideal for someone you doesn’t want to pay for re-spray or engine rebuild, hard work complete just enjoy

Hi Late 1990 32 GTR: Imported as personal import. I had a couple of guys looking for me in Japan with the brief of low klm, not thrashed and in excellent condition. One of the brokers that I got a couple of cars from previously had a family member that purchased a GTR from his uncle. I requested a Black Metallic one as well just to differentiate from the common Gun Metal Grey and rental car White. The car is still under 72000klm, I know you can’t always trust the klm but the odometer all lines up. Like anyone I go by the interior, compression, driveline and my mechanic always raves that it’s the tightest Skyline he has driven in years. Basically I didn’t want a car that had been thrashed that I would have to deal with the high maintaince costs and repairs, I have had huge bills before and I would prefer to pay the extra cash as it saves in the long run. * I am big on servicing and prevention and I give priority to having the car tidy.

Body & Paint: The car came over in good condition but like all cars it had lost its gloss. Being a bit fussy I got a complete respray as I wanted the car to be in show condition especially if I was going to be keeping it for a long time. I got a professional with a good reputation to complete the job as they do a lot of show cars. At the same time I got electronic aerodynamic side mirrors to modernise the car and the front lip painted to match the car. As well I got the guards rolled front and back to fit bigger wheels and tyres without scrapping and to allow the car to be lowered with coil over’s. * Under the car is extra clean with no surface rust or dings on chassis. I have previously seen a lot of imported cars with heavy marking from transport and jacks.

Suspension & Handling: I went TEIN for the lower control arms and for the coil over’s due to availability for maintanice in the future. I had the suspension guys set the coil over and alignment for street and touring. Overall it’s a tight set up for driving as a daily driver and for tight cornering. Polished front strut bar for stability. Extra Info: 1. removes the deflection at the joint from high cornering loads 2. Provides adjustability of the front track, giving greater clearance between the chassis and wheels (Only recommend 20mm per side) 3. Changes the lean angle of the front shocks by moving the front hubs outwards, reducing roll angles and effectively creating a camber increase

Wheels: I went the classic 33 GTR wheels that are pretty timeless and because I wanted genuine Nissan look. Unfortunately I paid for them when they where still expensive but they are worth it. For tyres I went the low profile Silica compound and they have only done about 2000klm very fresh and sticky.

Interior: We looked for a car that had not been lived in. I have kept it genuine even with the original stereo, pretty rare these day but it’s the only one that sits flush with out gaps. I had the interior steamed cleaned just too fresh it up. Overall the interior in great condition from what you would expect with low KLM’s. I have had the split controller hidden in the console with all hidden wiring.

Engine: Extra fresh engine to protect the engine the first thing I got done was a complete flush and then replaced the oil and flushed again. New oil cooler mounted in the front to maintain oil quality, reduce temperature & wear. Oil filter relocated fitted to make it easier to change filter and drain oil. Car has never been boosted as it’s not what I wanted when tracking it down or what I need. Split controller was recently fitted to enable different torque setting, very useful in the wet as it makes the car handle like its driving in the rain. The controller also enables the car to be switched from 4 to 2 wheel drive, HKS Air filters and extensions have been fitted. # Engine bay, as you can see from the pictures the engine bay is in great condition with not the usual scratches and dings. Instead of the boring flat black engine bay the engine covers have been sand blasted and painted with the Red 34 GTR colours.

Engine Servicing: Oil pressure sensor replaced &a full set of NGK Iridium plugs. Coolant flushed by Red devil Radiators & replaced with Genuine Toyota Timing Belts/Bearings Timing Belt Idler & Tension Bearing, Tensioner Spring, Cam Seals & Front Main Seal. Water pump. Nismo Reinforced Engine Mounts. By increasing the hardness of the rubbed used in the mount bush, it help to protect the engine from damage. Engine vibration is also reduced during acceleration and deceleration. Overall it improves accelerator response, shift feeling and cornering performance. Exhaust 3 inch Turbo back stainless exhaust with high flowed N1 catalytic converter.

Braking: Stainless steel brake lines to reduce wear and increase consistency. Upgraded front disks and new high quality pads all around. All Callipers have been painted 34 GTR Red to match engine.

Price $22950 Yes there are cheaper but you they are usually thrashed and will require engine rebuild, body work and paint to bring them up to scratch. Feel free to call and discuss. Regards Boyd 0408 188 777

Hi, I will consider trades plus majority cash my way. Cheers

hi

still for sale? where in brisbane is the car? has the engine been modified in any way and is the exhaust stock? might be keen to have a look but may be a bit above what i was hoping to spend. is the price negotiable? i am selling a 2003 vectra cdxi hatch 3.2 v6 manual if you had any interest in trade.

matt

hi

still for sale? where in brisbane is the car? has the engine been modified in any way and is the exhaust stock? might be keen to have a look but may be a bit above what i was hoping to spend. is the price negotiable? i am selling a 2003 vectra cdxi hatch 3.2 v6 manual if you had any interest in trade.

matt

Hi Matt,

Yeah still for sale I end up being out of town every time someone wants to look. I have kept the engine stock except for Oil cooler, pod filters, aftermarket computer. Split controller was recently fitted to enable different torque setting, very useful in the wet as it makes the car handle like its driving in the dry. Exhaust 3 inch Turbo back stainless exhaust, front pipes with high flowed N1 catalytic converter. Great note.

I am negotiable but not for any crazy drop, overall I do acknowledge there are cheaper GTR’s but they usually require paint, engine work and have high KLM

I am open to trades with cash my way.

Regards Taylor 0408 188 777

with Genuine Toyota Timing Belts/Bearings Timing Belt Idler & Tension Bearing, Tensioner Spring, Cam Seals & Front Main Seal.

uummmm

by the way, top looking 32, but seriously man, sell your novel to a Publishing house and get a job in an advertising agency

uummmm

Ian thanks for taking me to school, I missed a full stop and it should read.

Genuine Toyota coolant. Well serviced replaced Timing Belts/Bearings Timing Belt Idler & Tension Bearing, Tensioner Spring, Cam Seals & Front Main Seal.

Cheers

hi

still for sale? where in brisbane is the car? has the engine been modified in any way and is the exhaust stock? might be keen to have a look but may be a bit above what i was hoping to spend. is the price negotiable? i am selling a 2003 vectra cdxi hatch 3.2 v6 manual if you had any interest in trade.

matt

Hi Matt

I forgot to mention based near Carindale or City for work.

Cheers

thanks, keeping it in mind.

Hi Matt

E-mail if you want any more pics as I had to take some for a guy on the weekend. goog luck with the sale of your car.

Cheers

Guys

Forgot to mention the car comes with Blue tooth car kit, Nismo Key and Blitz Turbo Timer.

Cheers

Pics are back on line, as requested
Guys

Forgot to mention the car comes with Blue tooth car kit, Nismo Key and Blitz Turbo Timer.

Cheers

Guys

Just droping a line to say I am back in town this week, as a couple of guys wanted to catch up in the last few weeks but I have been away. Call or text if you want to check the car out. Please note price drop in previous posts.

Cheers

  • 2 weeks later...
Guys

Just droping a line to say I am back in town this week, as a couple of guys wanted to catch up in the last few weeks but I have been away. Call or text if you want to check the car out. Please note price drop in previous posts.

Cheers

Hi

I have been off line, but I have now replied to PM's, I am in town this week except for most of Saturday heading down to speed on Tweed.

Cheers

Hi

I have been off line, but I have now replied to PM's, I am in town this week except for most of Saturday heading down to speed on Tweed.

Cheers

Please note price drop, $22450 Cheers

Please note price drop, $22450 Cheers

Hi, Guys that called during the car is available for viewing this weekend, best to cal on 0408 188 777

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...