Jump to content
SAU Community

Recommended Posts

**8TH OF AUGUST** KRISPY KREME IN NARRE WARREN 10.30PM

We will move to the carpark just opposite the krispy kreme entrance you'll see us!! as the last event on friday was prety big for what we expected !!

this time we are printing out maps for you guys you can get on the day we will be travelling to that wheel/mag shop but this time with directions how to get there!! then we will head to princess sandown hotel to chill/catch up get food/drinks/petrol and so on. map isnt fully finished but yes will be up asap!

hope to see you all there again + more !!

hope this is enough notice for everyone who didnt get to come

feel free to post below if your coming.

if you have any questions just PM me or ask in thread

Peace

Edited by b3za
**8TH OF AUGUST** KRISPY KREME IN NARRE WARREN 10.30PM

We will move to the carpark just opposite the krispy kreme entrance you'll see us!! as the last event on friday was prety big for what we expected !!

this time we are printing out maps for you guys you can get on the day we will be travelling to that wheel/mag shop but this time with directions how to get there!! then we will head to princess sandown hotel to chill/catch up get food/drinks/petrol and so on. map isnt fully finished but yes will be up asap!

hope to see you all there again + more !!

hope this is enough notice for everyone who didnt get to come

feel free to post below if your coming.

if you have any questions just PM me or ask in thread

Peace

im there Bez! this time i will stay the whole time and not leave early

can i have some more specific location to where we are traveling? i am picking up a mate from airport at 8pm, so may be able to bring the MR30 skyline along somewhere for show & tell

just need to know what suburbs to aim for!

can i have some more specific location to where we are traveling? i am picking up a mate from airport at 8pm, so may be able to bring the MR30 skyline along somewhere for show & tell

just need to know what suburbs to aim for!

narre/princess hwy/dandy area mate.

Hey All! Thanks for coming !!! that turnout was WAY bigger than anyone expected hahaha. didnt count but we filled up all of the sandown hotel car park pretty well.

Ill get the pics up soon so all the SAU members who came can check out there rides.

Thanks all for coming! hope you had fun

Peace

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...