Jump to content
SAU Community

Respray

MP_R33

By MP_R33,
in Exterior & Interior Styling

 Share

Recommended Posts

R33GTRKid Experienced

R33GTRKid

Posted
Posted

depends mate entirely on what kind of job you want done and how much you want to spend. For a truly show car finish, back to metal will be required but this is going to cost mate, not sure on exact price per litre of paint but labour and paint back to metal (on the assumption no dents.rust) you will not have much change from $7,000

Link to comment
https://www.sau.com.au/forums/topic/231328-respray/#findComment-4062488
Share on other sites
nvsA4 Enthusiast

nvsA4

Posted
Posted

depends on brand of paint, the paint we use at work is one of the most exspensive on the market and we pay about $600 for a clear kit, there are cheap brands that are like $100 and PPG from memory is about $400.

USeally for a re-spray they just sand all the clear off with about a 600 grit paper then apply the colour again then clear it so you'll have a higher firm of paint but you really wouldnt be able to tell from just looking at it

Link to comment
https://www.sau.com.au/forums/topic/231328-respray/#findComment-4064120
Share on other sites
Sambo33 Grand Master

Sambo33

Posted
Posted

yeah, the majority of the time its a case of sand the old paint coat, filling the dents, priming, painting. unless you are prepared to pay the cost of a bare metal finish (not cheap)

im keen to repaint my car at some point, just gotta decide on a colour :S

Link to comment
https://www.sau.com.au/forums/topic/231328-respray/#findComment-4066768
Share on other sites
nvsA4 Enthusiast

nvsA4

Posted
Posted
yeah, the majority of the time its a case of sand the old paint coat, filling the dents, priming, painting. unless you are prepared to pay the cost of a bare metal finish (not cheap)

im keen to repaint my car at some point, just gotta decide on a colour :S

i'm in the sasme boat. I'll be painting my GTR straight away just can't decide on a colour

Link to comment
https://www.sau.com.au/forums/topic/231328-respray/#findComment-4068400
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Borci88
      Borg Warner EFR Series Turbo's V 2.0

      By Borci88 · Posted

      Before I commit to it as I already have the wastegate off the car, would you change it to the 9psi spring instead of the 12, or whack it back on now and try your suggestion?   Edit: Actually I might just swap the spring and see what the logs say after another few pulls, as we know it's still spiking without the Mac valve in the picture so I need more data without the Mac valve trying to combat the issue.
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Chocolate Cheesecake.
      Infiniti Q60 Navigation Update

      By Chocolate Cheesecake. · Posted

      Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • R0yalT
      R34 GTR Vspec Garage Sale - All must go!

      By R0yalT · Posted

      Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
×
×
  • Create New...