Jump to content
SAU Community

R32 Gt-r Parts, Sold Car, Dont Need In Brisbane

blur

By blur,
in Classifieds

 Share

Recommended Posts

blur Proficient

blur

Posted
Posted

After selling my R32 GT-R I have some parts I no longer require

N1 type boot lid lip, painted black, in good condition. $120

Cusco caster arms/ tension rods. Ball joints in good order. $80

IBA R32 strut brace bar. probably do with a polish or paint. $50

GT-R bumper bar rheo (steel bit behind bar covers) front $150, rear $50

GT-R bov return pipe, the really expensive plastic one under the intercooler, no cracks in vgc $80

GT-R / GTS Titanuim 3.5 inch cat back exhaust. Super light approx 5kg. 1 muffler with silencer. In very good condition, 1 tiny mark underneath otherwise as new condition. $850

Front sump/ diff assembly. seems to be in good order. $100

I can get pics if you want something, send a pm with your email addy.

All parts located northside of Brisbane at Kedron. Would be prepared to post the smaller items (aus post size) unless you want to organise pickup and freight at which I can assist.

Pm me for contact details.

  • 2 weeks later...
blur Proficient

blur

Posted
  • Author
Posted

caster arms, sold.

front diff, sold.

strut brace on hold till weekend.

Also have some vgc r32 doors for sale in silver, $reasonable offers.

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 gtr transmission strength, billet plate

      By GTSBoy · Posted

      Just put skinny tyres on it.
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...