Jump to content
SAU Community

Recommended Posts

Item:

Bare long engine means head block & sump

Rebuilt rb26 engine full balanced down to the clutch

N1 24u block

Detailed block

Torque plate bored and honed

N1 oil pump

N1 water pump

Ross forged pistons ceramic coated (coating cost $300)

Standard 26 rods with arp bolts, detailed and shot peened

ACL race bearings

ARP bottem end stud kit

Nismo lightened flywheel

Ported and polished head

Upgraded valve springs all new shims

Standard cams

Greddy cam gears

Gates timing belt

New exhaust studs

Modifited sump for RWD

mechining cost me $3300 alone.

Age:New

Condition:Hasn't been run yet still sitting in the garage run out of money to finish conversion

Price:$6000 ono

To Fit: (What car)any

Location:hervey bay qld can get to brisbane for free

Contact:anthony 0438774173

Link to comment
https://www.sau.com.au/forums/topic/233562-forged-rb26-engine/
Share on other sites



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...