Jump to content
SAU Community

Recommended Posts

Make: nissan

Model: 1990 series 2 a31 cefiro

Milage: 200,000 i think from memory

Transmission: r32 gtst auto

Colour: just painted 2 weeks ago, mazda colour, think its called phantom blue

Location: brissy northside

Complied? yep with 12 months rego

RWC supplied? yep 1.2 months left

Currently registered? yep

Price: eoi at this stage but the completly stock a31 rb20e's are 5-6g so 8G

Contact: pm or 0434961606

Comments / Modifications: just had it painted, new uras bodykit, new bonnet,

Images: below

basically im only selling because i want to save and get back into a fc rx7, so swaps for a very very cheap daily driver (charade/excel)

well its a pretty optioned cefiro with

* sunroof

* black and grey interior

* its a s2 so has the kouki tail lights, s2 front grill and projector headlights

* kyb struts ( handles quite well )

* has a very fresh re-spray only about a week old

* uras monkey warehouse body kit

* shaved rear spoiler

* it has a good strong rb20e and auto but its a simple an cheap job to chuck in a rb20det manual

* electric windows, sunroof, mirrors, seats ect

* sr20 silvia rims with 80% tread

its a really nice looking car with electric everything but i just cant resist the urge to get into another rx7

will consider either swaps for a really cheap daily 4 cyl with cash or a fc rx7

oh and i have recepts for about 4200 for the paint and panel

cheers

13082008036sy8.jpg

16082008037vv5.jpg

ceffypaintjobks2.jpg

ceffypaintjob2go6.jpg

Link to comment
https://www.sau.com.au/forums/topic/234158-eoi-eoi-nissan-a31-cefiro/
Share on other sites

on saturday a r32 gtst automatic gearbox was fitted and shifts really well also is alot stronger then the n/a box that was slipping, also had the auto serviced, a new aircon compressor was fitted and a new power window switch, spent quite abit in the last week, engine was also serviced at the same time

everything is sweet with the car and its looking sweet, perfect p plater car and awesome daily driver

note: plates dont come with the car either the gf would kill me

cheers

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...