Jump to content
SAU Community

Recommended Posts

hey guys

im buying a rb26 out of a it has forgies ect... hks gtss turbos im looking to push just over 400rwhp the engine has standard oil pump but was replaced 15000ks ago im looking to upgrade it, i was told n1 oil pumps are shit and just buy a jun or something the car will only be on the street and a few dyno runs

is it worth buying a jun? or do i just buy a n1 oil pump?

cheers

Link to comment
https://www.sau.com.au/forums/topic/234420-n1-oil-pump-standard-or-aftermarket/
Share on other sites

Stick with stock or upgrade to a billet geared pump. Im using stock and i will be pushing upto 600hp at the wheels. The only thing to becareful is hitting rev limit alot as this is what can shatter the pump gears. You can look at upgrading the harmonic balancer to help things.

Thats a tricky one. I'm sticking with my stock one because:

#cost.

#It's an r33 engine so it has a wider crank and drives more of the pump face

#never had an issue with this stock pump, even after 4 years and 100,000k of use and reving to 8500, sometimes to 9500 when I first bought car it #stick was in great nick.

#Stock pump is not as hard as N1 (more brittle)

#I don't bounce off the rev limiter or anything stupid like that so it's fine for my driving style.

# not building a 700hp plus engine

If I was on $100k a year I could checkbook race and buy a tomei pump, sump etc, but I'm not so I make use of what I can afford.

My 2 cents.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...