Jump to content
SAU Community

Recommended Posts

hey guys

i just installed an avc-r to my r33. but im getting really high boost in 5th my boost settings at 51% duty

and 1.30bar,

all other gears are fine but in 5th it often reaches 1.8 under full load. to counter this i set the 5th gear duty

down 20% in order to control, but its really unstable and fluctuates btw .8 and 1.2 bar?

cheers

Link to comment
https://www.sau.com.au/forums/topic/234660-avc-r-owner-plz-help/
Share on other sites

hey guys

i just installed an avc-r to my r33. but im getting really high boost in 5th my boost settings at 51% duty

and 1.30bar,

all other gears are fine but in 5th it often reaches 1.8 under full load. to counter this i set the 5th gear duty

down 20% in order to control, but its really unstable and fluctuates btw .8 and 1.2 bar?

cheers

Maybe try increasing 5th gears feedback?

Maybe try increasing 5th gears feedback?

ive set all of them at 2. ive heared that if i increase it will decreases stabitity because the solenoid

will over correct it self? wat have u set urs at?

Have you tried playing with the gain?

gain, as in start duty?

if so i have set 5th gear start values at -20% in order not to reach 1.8bar but it isnt stable and fluctuates btw .8 and 1.2.

ive set all of them at 2. ive heared that if i increase it will decreases stabitity because the solenoid

will over correct it self? wat have u set urs at?

Mine was around 2/3 to start with but I actually have them set to around 5 at the moment, with 1st and 2nd gear set at 7ish. I am still playing around with different settings but since i set them higher the car has been sticking WAY closer to its target boost. The feedback as far as I understand is how often it samples and corrects, which (how I interpret it) means it can provide abrupt boost level changes if you have a good external wastegate setup. I have an internally gated GT30R which seems quite lazy about its behaviour, so having the boost controller "all over it" seems to help it build up boost faster then level off better once it has hit the target boost level.

I recommend at least playing around and finding out what works for you, as different things definitely seem to work better for different setups.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What Duncan said sounds right. Also, it looks like they only have the driver's mat. Not the rest. Because looking at the diagram: KG4911 is just the mat for the driver. KG4900 is the full set if I'm not mistaken and discontinued.   But, it looks like they may still have the full set for the manual S2. Might be worth checking for the other models as well as they seem slightly different. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/misc/G49 Man, I'm tempted.
    • I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
×
×
  • Create New...