Jump to content
SAU Community

Looking For A High Recomended Tuner/builder In Melbourne? Plz Help?


Recommended Posts

need a tuner in melbourne that is worth the money an does a awesome job no half assed tunes...for current set up an new engine build not to far away... rb26 has current set up of

arias 87mm forged pistons

eagle H beam conrods

acl race bearings

tomei metal head gasket

full engine balance

ross balancer

jun oil pump/colar

tomei sump baffle/oil restrictor

external oil feed back from head

tomei 260deg 9.15 lift pon cams/valve springs

full port an polished head

cam gears

hks 2530's

trust 125mm drag cooler/oil cooler

rb 25 afms

sard 700cc injectors

bosch 044 pump

apexi pfc

split dump pipes

twin 3'' into single 3.5 apexi n1 exhaust

hks evc4

the car still has stock turbo manifolds an turbo acuators an want to change them so will need a tune current set up made

347rwkw on 18 psi on a crd tune so i need a new tuner to deal with as sydney is to far away an i live 2 hours from melbourne also changing fuel rail an reg at same time an maybe some nos so hoping to get a bit more out of it for the drags so guys please help for a tuner an any more parts that may help that i should have????

Racepace hands down, plenty of threads about them.

Although you wont need half the aftermarket stuff you want to put on there :)

Plenty of cars making much more on factory manifolds, rails, regs and so on.

Racepace hands down, plenty of threads about them.

Although you wont need half the aftermarket stuff you want to put on there :)

Plenty of cars making much more on factory manifolds, rails, regs and so on.

yeah cheers i have a fair few of the bolt on's already for the new engine in a while to come so i thought i

i might use them....an i brought the manifolds an hks actuators used off a mate an wanted too see if i could get a bit more out of my current set up

Try Dr Drift he is awesome does a good job.Ive seen some very potent

cars leave his workshop with happy customers.I drove all the way from

Syd to Melb to get him to tune my car and very happy with the result

and not only the tune the after sales support.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • your right the maps for Australia came out in 2017 but are 2010 maps. i got the updated maps SD card put it in and it was the same. Same maps in my Brothers Nissan Patrol. 2020 i think his car is
    • Yeahhhh, the costs have killed me. Spent more than the cost of an engine rebuild and it most mostly servicing and a tune lol.
    • I'm not 100% how the BMW racers do it, but I know from other brands like Merc, moving, and changing the coolers is one of the things. Like getting a transcooler out from infront of the radiator to out near a wheel arch. So some of the stuff you've got crammed in the middle front, spread it out and open up where you can in the bar to get more air in to the sides.
    • Small update for the day... Turns out the intercooler and engine coolant hose kits are anything but complete....I probably should have counted better but it only really covers about half the coolant hoses in the car, it really just covers the visible stuff and pretends everything else doesn't exist (turbo water feed and returns and also heat exchanger lines through the 2 pumps and cooler) .In any case, I'm happier to have half reliable hoses than none, but a bit of a disappointment. Anyway...finger click (and 5 hours).....hoses in place, lots of spring clamps replaced with screw clamps, and engine coolant is on the pressure tester for the night.   Incidentally, upsized header tank is an Inifiniti factory option....not sure I'll ever do prod car racing in this but at least it is legal.
    • Just weld it onto the hot pipe. If you want it right after the turbo, put it right after the turbo. Or rip the comp cover off and drill and tap a hole into it.
×
×
  • Create New...