Jump to content
SAU Community

Recommended Posts

the series 2 grillie will not fit on a series 1. They are different in size. the bonnet from a series 2 goes down lower therefore the grillie will be shorter in height. i tried to fit a series 2 grillie on my car before and it leaves a hugeee gap. doesnt look good .

Link to comment
https://www.sau.com.au/forums/topic/23708-red-s-r33-grill/#findComment-511232
Share on other sites

pushead.

Ok that might be the case. What im trying to say is, the grille that i have on my s2 car (which is the one hippy wants) will fit on both a series 2 and 1 car. Now the picture i posted up, (series 2 grille???) will fit on a series 2 car, but according to u not on a series 1 car. Which isnt my case so i dont really mind.

Thanks for clarifying it up.

Link to comment
https://www.sau.com.au/forums/topic/23708-red-s-r33-grill/#findComment-511633
Share on other sites

I didnt know 95 gtst is a series 2. Are you sure hippy wanted the series 2 one? from memory, series 2 are 96+ .. the picture you have attached is not the one with the red 's' . hippy wanted as stated in the title of this thread The RED 's' Grillie'

Link to comment
https://www.sau.com.au/forums/topic/23708-red-s-r33-grill/#findComment-513278
Share on other sites

Hippy,

Not sure if this will help u out......I have the same car as you...95 gtst s1 1/2 (actually known as a series 2). I have the front grill for sale but has a silver S on the front.....how hard would it be to paint the S red??

Anyway let me know if u r interested

Thanks

ant95GTR

Link to comment
https://www.sau.com.au/forums/topic/23708-red-s-r33-grill/#findComment-519776
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...