Jump to content
SAU Community

Recommended Posts

Hi guys, just before i go on my spiel i would like to thank everyone who showed patience through the whole saga, it was not only frustrating for everyone else but also for myself and Adrian too. Big thanks has to go to Pete (SLED) for helping us out also. Kudos also to those who whole-heartedly supported us, it means alot to us.

Now, this may not be the outcome that alot of you want, but IMO it is the best outcome we could have hoped for at this stage.

The printing company, VELFLEX, has agreed to supply us with a blank replacement for each hoodie/jacket. This includes us being able to keep the ones we have. Steve (MADAZ) has generously agreed to take over the printing for the blank hoodies, but your old and new hoodie is your property now, and you do not have to have the reprinting done.

Once again, apologies for the whole situation, i accept that the current hoodies are not what we wanted. Im hoping everyone can move on from this and we can all be friends and hold hands :banana:

From Adrian and Damo :D

Link to comment
https://www.sau.com.au/forums/topic/237131-hoodies/
Share on other sites

  • Replies 310
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Cheers heaps for you hard work Damo and Adrian even if i did have a little sook

for the price of these next hoodies im sure you guys wont mind forking out a little again and i will put a small markup on the hoodie so i can donate some money to Christian for the running of the forums but when i nail everything down i will let everyone know and make a thread in the Group buy section

yeah my plans involve embroidery the firm I'm looking @ will probably be better for a complete they supply and embroider so with what we have now im going to wait till we can get some local quotes for embroidery as we dont want to pay for freight 3 times

Link to comment
https://www.sau.com.au/forums/topic/237131-hoodies/#findComment-4148485
Share on other sites

awesome work guys, very happy with ya work.

cancel my comment i like madaz idea :banana: will look a lot more profesh in my opinion and prob cost like 2bucks more. the crap they printed with on the jumpers i reckon is better suited to t shirts only

but awesome work none the less all

Edited by Inline 6
Link to comment
https://www.sau.com.au/forums/topic/237131-hoodies/#findComment-4148500
Share on other sites

yea no shit! for a company to f**k up so hardcore, then give us a blank hoodie in negotiation isnt that dodgey to anyone else! not a dig at adrain or damo, but should we try negotiating and getting what we payed for not, paying $55 for a blank hoodie in the end! im sure you have been negotiating with them anyway, but should we try just a little harder?

Link to comment
https://www.sau.com.au/forums/topic/237131-hoodies/#findComment-4149138
Share on other sites

lol boys it was fifty dollars so what we have to pay a bit more to get a great product im a single mummy and i dont care we are lucky to even get the blank ones anyway so you just need to pay for the embrodery so what now be good boys and pay madaz x

Link to comment
https://www.sau.com.au/forums/topic/237131-hoodies/#findComment-4149140
Share on other sites

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...