Jump to content
SAU Community

Recommended Posts

Just bought a 98 Skyline R34 GT non turbo 4 door which is pretty stock, im only 21 so modifications’ are pretty limited when it comes to insurance and all the rest. I want some advice as to what I should do to the car, who I should contact and how much it is going to set me back. Then I can get an Idea of what needs to be done first. Heres some pictures of it:

l_106fd261eb00d753e96f3ee042d07f8c.jpgl_fed5923eb53a78cf46d4f0d95ae7c374.jpgl_c3e35d21557d4e7172dcefad486ea297.jpg

Edited by Goldy98
Link to comment
https://www.sau.com.au/forums/topic/237230-98-skyline-r34-gt/
Share on other sites

Hey bud. I walk past your house everyday on the way to work :O

I own the white r33 series 2 that sometimes goes past but havent been driving it because i lost my licence :D

You owned the auto series 1 r33 before?

You buy your car from a guy called Joe in chelsea?

Hey bud. I walk past your house everyday on the way to work :O

I own the white r33 series 2 that sometimes goes past but havent been driving it because i lost my licence :D

You owned the auto series 1 r33 before?

That was the previous owner and he did own an R33 before hand.

I also past this place nearly everyday, near the roundabout in aspendale. Anyway I got a 4-door gt-v manual, like urs, no spoiler though (please remove it, 4 doors look better without spoilers), and getting uras body kit, exhaust, sound system and that's it, springs to lower it... costing about 4k in total. Did you buy this car from someone named joe? He looks like a monkey.

Edited by WIHAGTR

full comprehensive insurance for me is $1900 a year and im 24 clean record, through just cars...

i think with mods it about a $50 buck increase to your yearly premium for every mod u do...

I first got suspension done, through the sydneykid group buy...about $1200 for shocks and spirngs:

http://www.skylinesaustralia.com/forums/R3...tel-t88141.html

Get full exhaust, plenty of systems out there, assuming uve got cat back....plenty of good front/dump pipes avaliable on this forum, as well as cats

I got a CES front/dump, cost $550! buts its the balls. Catco high flow cat $440...

Boost controller, heaps avaliable on this forums...

And then get a nistune chip, www.nistune.com, biggest bang for ur buck!!! my tuner got an extra 40kw outa my car with above mods plus splitfires...

hope that helped mate, cheers!!

full comprehensive insurance for me is $1900 a year and im 24 clean record, through just cars...

i think with mods it about a $50 buck increase to your yearly premium for every mod u do...

I first got suspension done, through the sydneykid group buy...about $1200 for shocks and spirngs:

http://www.skylinesaustralia.com/forums/R3...tel-t88141.html

Get full exhaust, plenty of systems out there, assuming uve got cat back....plenty of good front/dump pipes avaliable on this forum, as well as cats

I got a CES front/dump, cost $550! buts its the balls. Catco high flow cat $440...

Boost controller, heaps avaliable on this forums...

And then get a nistune chip, www.nistune.com, biggest bang for ur buck!!! my tuner got an extra 40kw outa my car with above mods plus splitfires...

hope that helped mate, cheers!!

its NA...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks MBS206, i got that PDF but got abit overhelm with all the connections and tracing of wires. I wasn't expecting to plug the dash harness anywhere. i was just going to use my electronics jumper wires to plug into the right pins like ECU power, ecu ground, ignition trigger etc... I do have a few ratchet straps locking it down tight. Fire extinguisher ready and only a small amount of fuel at a time, enough to submerge the pump.
    • Thanks GTSBoy, i will do abit more digging. I am missing a blue relay near the ECU connector... so i will chase that up in the next few days as well  
    • https://yariksteel.ru/manual/R33/Skyline_R33_elektroprovodka.pdf   Page 18 should be what you want for the Dash Cluster wiring. Though, you don't need the dash plugged in to get the motor running. What you want is power as how GTSBoy said. You need to power the ECU. Find in the above link the ECU pin outs (Verify them before just connecting them up from things written on the internet). Find anything needing power, give it power, find anything needing ground, give it ground. Then give the starter motor power through a big cable, and bridge the solenoid on the starter straight to power too.  ECU will be on, and when you give the starter power, it'll spin the starter motor, and it should start. I also hope you have a proper stand, and not just the engine sitting on some wood. You will want it bolted down properly.
    • Hello everyone, I am happy to join you.
    • Whereabouts are you, that looks exactly like Akira's old car....
×
×
  • Create New...