Jump to content
SAU Community

Fibreglass/carbon Sheeting In Wa

tdan

By tdan,
in Fabrication

 Share

Recommended Posts

tdan Contributor

tdan

Posted
Posted

Hi All

For all those folks out there in WA who were looking for a fibreglass supplier and maybe even some carbon fibre sheeting for all their fabrication needs, I have found a shop in Osborne Park that supply such items.

Here is the link Kirkside Products

Click on that and you can get an overview of all the items that they stock there. You will still need to contact them, or go in and see them regarding prices, but to me, it works out a lot cheaper that buying the stuff from Bunnings evry 2-3 days.

Good luck with your projects.

Link to comment
https://www.sau.com.au/forums/topic/238845-fibreglasscarbon-sheeting-in-wa/
Share on other sites
  • 4 weeks later...
MearCat Proficient

MearCat

Posted
Posted
Here is the link Kirkside Products

These guys have been around for years and I have been sourcing all my fibreglass materials from the since I started my gauge pod business a few years ago. Their range of glassing and moulding materials is fantastic too. One day I sat down and worked out that Bunnings is between 3 and 4 times more expensicve than Kirkside.

tdan Contributor

tdan

Posted
  • Author
Posted
One day I sat down and worked out that Bunnings is between 3 and 4 times more expensicve than Kirkside.

Yeah it didn't take me long to figure out that Bunnings is a huge rip off. before I found these guys, I had to put it a special order with Bunnings to make sure they have the stuff in stock. Since I got hit with the customising bug, I have been going through heaps of the stuff.

tdan Contributor

tdan

Posted
  • Author
Posted

I'm pretty sure it's all DIY stuff. There is a "contact us" link on the website. Click on that and shoo them a question. But in all honesty, it's not that hard to DIY carbon fibre. It just takes a little time and a lot of effort.

Hope that helps.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • TurboTapin
      Most women will agree that parking is the most taxing part of driving

      By TurboTapin · Posted

      What a time to be alive!!
×
×
  • Create New...