Jump to content
SAU Community

Recommended Posts

That's freakin' cheap. Mine was $3k plus tyres.

MAKE SURE you ask what is included with the $2.5g! You don't wanna be slapped with extra charge of this and that especially with your aftermarket parts, they'll probably gonna charge you labour cost to remove them, fit std parts on for compliance, then refit your parts back on after compliance, that could sting a bit.

could be an earth wire kit (I hope for your sake) which is said can improve voltage stability and give a bit more power, regardless whether you're skeptical about it or not...

if it's some dodgy wiring from previous owner, then I wish you the best of luck it didn't stuff up

welcome to the world of importing cars from Japan!

don't let the rarity of an expensive jap wheel deter you at all. If anything its a plus that you're getting it with the car. You will also have slightly better re-sale value once you get sick of the wheels and want something else. Definately unique looking wheels and better than anything you can buy locally. I vote you keep it, and lower the car to suit :(

could be an earth wire kit (I hope for your sake) which is said can improve voltage stability and give a bit more power, regardless whether you're skeptical about it or not...

if it's some dodgy wiring from previous owner, then I wish you the best of luck it didn't stuff up

welcome to the world of importing cars from Japan!

Looks like a wiring earth kit and quite a well done one, as they can sometimes be everywhere.

don't let the rarity of an expensive jap wheel deter you at all. If anything its a plus that you're getting it with the car. You will also have slightly better re-sale value once you get sick of the wheels and want something else. Definately unique looking wheels and better than anything you can buy locally. I vote you keep it, and lower the car to suit :(

isn't it lowered already ? I cant afford anything else unless it's free :)

post-55737-1223298465_thumb.jpg

That's freakin' cheap. Mine was $3k plus tyres.

MAKE SURE you ask what is included with the $2.5g! You don't wanna be slapped with extra charge of this and that especially with your aftermarket parts, they'll probably gonna charge you labour cost to remove them, fit std parts on for compliance, then refit your parts back on after compliance, that could sting a bit.

The 2.5g doesnt include tyres. I was told that the tyres on the car are in good condition so therefore didn't need to buy new ones. And how much can they charge to take things on and off cant be more then a few hours work , so anothe couple of hundred max .

Manda-those wheels are hot dont loose them just yet. The biggest issue is the fact that they are 20Inch which means rubber is expensive. etc. fact is you will scratch any rim at some point. Worry about it only when you've knocked them round a bit.(swap them if you must for 19's)

My 05 premium is chipped (not sure but must be Impul from all I see/hear), and has the slightly bigger exhaust. It runs like a Dream on 98 Oct so dont panic. No problems starting at all !. The power output at the engine with the chip & exhaust will get you around the 221kw (298Bhp)or over 200 hp at rear- no problem.

Compliance cost 3K+GST. (three people quoted exactly that figure)). Exhaust changes will be at cost to remove then replace once complied. +Tyres separate.

As others have said check they are doing everything.

Sorry-they are 19inch rims-Just unusual to run 35 profile. Normally run 40 for 19's. But shes running slightly wider fronts 245 (i/o 225) so guess that offsets.

Manda-those wheels are hot dont loose them just yet. The biggest issue is the fact that they are 20Inch which means rubber is expensive. etc. fact is you will scratch any rim at some point. Worry about it only when you've knocked them round a bit.(swap them if you must for 19's)

My 05 premium is chipped (not sure but must be Impul from all I see/hear), and has the slightly bigger exhaust. It runs like a Dream on 98 Oct so dont panic. No problems starting at all !. The power output at the engine with the chip & exhaust will get you around the 221kw (298Bhp)or over 200 hp at rear- no problem.

Compliance cost 3K+GST. (three people quoted exactly that figure)). Exhaust changes will be at cost to remove then replace once complied. +Tyres separate.

As others have said check they are doing everything.

Manda-those wheels are hot dont loose them just yet. The biggest issue is the fact that they are 20Inch which means rubber is expensive. etc. fact is you will scratch any rim at some point. Worry about it only when you've knocked them round a bit.(swap them if you must for 19's)

My 05 premium is chipped (not sure but must be Impul from all I see/hear), and has the slightly bigger exhaust. It runs like a Dream on 98 Oct so dont panic. No problems starting at all !. The power output at the engine with the chip & exhaust will get you around the 221kw (298Bhp)or over 200 hp at rear- no problem.

Compliance cost 3K+GST. (three people quoted exactly that figure)). Exhaust changes will be at cost to remove then replace once complied. +Tyres separate.

As others have said check they are doing everything.

Thanks for your input. So is your chip impul as well and what does it do ? I have the fujitsubo exhaust system as well have you had it dyno tuned im curious to see. I was thinking about selling those wheels and getting something a bit cheaper to give me some money back from the compliance , etc.

Also yes they are 19" . The tyres are 245/35/19 and not sure about the rear maybe bigger. If i have to buy some more tyres i will be very angry ! What colour is yours and what wheels you got on it . Do you have any pictures . Mine is a 03 model.

Here is my o5 coupe. Not sure what the chip is. I know all standard V35's pull 206kw.Add the exhaust & chip and the I few a saw/test drove were all quoting 221kw(298BHP) which is easy to believe. You loose about 30% to the back wheels. (so near enough).

Look at the wheels another way-Check what you would get for em now & if its alot less than a decent set of 19's you will be out of pocket anyway. Better to hang on to them. otherwise choice is yours..

post-55154-1223853757_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
×
×
  • Create New...