Jump to content
SAU Community

Recommended Posts

hello everyone

im thinking of buying a aftermarket ecu for my r33 gtst skyline, just tryign to work out which is the best computer value for money wise and tuneable capabilities i want to run a ecu that uses map sensor coz i cbf with afm's and upgrading them

so what should i go for people :

mico tech

wolf

link

apexi fc

cheers people

Link to comment
https://www.sau.com.au/forums/topic/239195-best-aftermarket-ecu-for-r33-gtst/
Share on other sites

hello everyone

im thinking of buying a aftermarket ecu for my r33 gtst skyline, just tryign to work out which is the best computer value for money wise and tuneable capabilities i want to run a ecu that uses map sensor coz i cbf with afm's and upgrading them

so what should i go for people :

mico tech

wolf

link

apexi fc

cheers people

Apexi needs an AFM so if you cbf with upgrading AFM the apexi will not be great further down the track.

Link on the other hand runs of a map sensor - AVO will install and tune one of these for around the 2k mark (maybe a little over)

Not sure abotu the rest.

Well from your own post...

Workout the features of your listed ECU's

Then find out the price.

Then workout what fits into what you want

There is enough (well, more than enough) info on each ECU, what it will/wont do and so on. It comes down to you at the end of the day with your decision.

Microtech

http://www.skylinesaustralia.com/forums/se...e=%2B+microtech

PowerFC

http://www.skylinesaustralia.com/forums/se...2B+PowerFC++PFC

Wolf

http://www.skylinesaustralia.com/forums/se...ighlite=%2Bwolf

Haltech

http://www.skylinesaustralia.com/forums/se...lite=%2Bhaltech

Motec

http://www.skylinesaustralia.com/forums/se...ghlite=%2Bmotec

Autronic

http://www.skylinesaustralia.com/forums/se...ite=%2Bautronic

Emanage

http://www.skylinesaustralia.com/forums/se...lite=%2Bemanage

EMS

http://www.skylinesaustralia.com/forums/se...ighlite=%2B+ems

Remap/Nistune

http://www.skylinesaustralia.com/forums/se...ghlite=%2Bremap

Apaptronic

http://www.skylinesaustralia.com/forums/se...e=%2BAdaptronic

Link

http://www.skylinesaustralia.com/forums/se...ighlite=%2Blink

There are also a number of other threads such as this one searching with '+which +ECU':

http://www.skylinesaustralia.com/forums/t1...;hl=which+++ECU

http://www.skylinesaustralia.com/forums/t1...;hl=which+++ECU

http://www.skylinesaustralia.com/forums/Pl...ng-t218179.html

Im closing this based on the sheer amount of info that can be found across the forum as displayed by the links about.

Any ECU's that ive missed will appear in results above aswell.

Thanks

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...