Jump to content
SAU Community

Recommended Posts

DSC01360.jpg

Item:

1998 Nissan S14a 200SX

Location:

Toowoomba, QLD (Hour and a half from bris)

Item Condition:

Excellent

Price and Payment Conditions:

$23,600 With 6 Months Rego

Extra Info:

1998 S14a 200sx S2, Rebuilt JDM S15 SR20DET, all tests welcome.

Engine

* Rebuilt JDM S15 SR20 Blacktop

* Garrett GT2871RS (5,000 km Old)

* 600x300x76 Hybrid GT Spec Front Mount

* CP Forged Pistons

* Eagle Rods

* BRAND NEW CRANKSHAFT - CRYOTEMP TREATED

* ARP Head Studs

* ARP Main Studs

* Cometic Multi Layer Steel Head Gasket

* ACL Race Series Bearings

* Tomei Rocker Arm Stoppers

* New Oil Pump

* New Fuel Pump

* New Oil Pressure Sender

* New Thermostat

* New Water Pump

* New Timing Chain

* New Full Genuine Gaskets

* New Alternator belt

* New A/C Belt

* New Power Steering Belt

* New Gear Control Lever Boot

* New Fuel Lines And Clamps

* New Vac Lines

* 3" Exhaust With Twin Pipes

* Xforce Stainless Steel Manifold

* Copper Lock Nuts (Manifold)

* Stainless Steel Intake Pipe

* GFB Plumb Back BOV

* Exedy 5 Puck Sprung Centre Button Clutch

* Blitz Radiator Cap

* Bosch 044 Fuel Pump

Body And Interior

* Brand New Bride Ergo II Seat With Superlow Rail

* JDM Badging Front And Rear

* Apexi Pen Turbo Timer

* Full Vertex Body Kit (Genuine Not Copy)

* T20 Tint

* Mongoose M80 Alarm with window wind up module

* Re-sprayed in 2005, in factory colour

* Alpine CDA-9886i Head Unit

* Alpine Type R Splits

* Alpine Type R Coaxials

* Halogens

* Speco Boost Guage

* Dash Plastics Painted In Phantom Mica (Black)

* A Pillar Plastics Painted in Phantom Mica (Black)

* Rocker Cover Painted in Phantom (Purple)

Wheels

Rear: Koya Drift Teks (Black) 17x9.5(+18 Offset) (Brand New)

Front: 17 Inch R34 Wheels (Black)

Brand New Tyres All Round

DSC01368.jpg

DSC01361.jpg

DSC01365.jpg

DSC01376.jpg

DSC01380.jpg

DSC01382.jpg

This car is extremely tidy inside and out and will not dissapoint

Contact Details: I Would Prefer To Be Contacted By Phone, but feel free to pm or email

James - 0401 679 450, Call or sms

or via pm

Link to comment
https://www.sau.com.au/forums/topic/239499-1998-s14a-silvia-tidy/
Share on other sites



  • Similar Content

  • Latest Posts

    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
    • Yes it is ATF. I quote @Duncan "it takes a good synthentic auto trans fluid like Castrol Transmax Z" It's not a diff. It's a transfer case. Totally different thing. Yes, fluid will come out the sender hole. No you do not really need to drain it. Just pull the old, quickly poke the new, clean up and top up. But realistically, you should probably take the opportunity to change it anyway.
×
×
  • Create New...