What Size Fittings For Gt35r?

[Alf]

Looking to make up some oil and water lines for the Rb30/25, GT35R.

Been looking at Earls and Speedflow fittings but not sure what size fittings and hose I'd need.

[SirRacer]

I wrote out a document for a mate that covered all the fittings for an rb -> Gt3540 so your very much in luck.

I got my bits from a place in NZ www.staparts.co.nz. They are incredibly cheap and well worth the money. (these prices are in NZD)

Hope this helps. I wish someone had given me a list before i started. By the way -6 for water will be fine. I liked the look of -8. I also covered these in a thermal heat coating as well which was extra.

Oil Return

2 Bolt Oil Drain -10 fitting 24.56

-10 Stainless Hose 21.90 (2 feet)

XRP 981613 ¾ NPT -10 Adaptor 34

- 10 Staight hose ends 23.76 (2)

Oil Feed

M12x1.25 -4 Adaptor Don’t remember price

2 x -4 90 Hose Ends 43.92 (2)

2 Feet -4 Stainless Braid 10.16 (2 feet)

-4 Male to 7/12 -24 Adaptor 7.96 (into -4 90 to suit Gt3540r)

Water (Feed and return)

Water feeds are the same into the turbo as from the block

M14x1.5 -8 Male x3 Block & Turbo 25.29 (3)

M14x1.5 -5 90 (to mount into intake) 7.62

-8 Pushloc Hose 4.55 per foot (18.20 as I needed 4)

-8 90 Hose ends x2 43.92 (2) From block and into turbo

-8 45 Hose Ends (turbo side rocker cover) 24.44

-8 Straight (into 90) 7.40