Jump to content
SAU Community

Fs: 18x8.5 +30 Rays Gold Volk Racing Forged Ce28n+tyres

Skyalwaysblue
 Share

Recommended Posts

Skyalwaysblue Enthusiast

Skyalwaysblue

Posted
Posted (edited)

Item: Genuine 18X 8.5 +30 offset GOLD VOLK RACING CE28N FORGED RIMS + TYRES

PCD: 114.3X5 and 100x5 multi stud pattern. They are forged rims from RAY Volk racing series. Their weight is 17.3 lbs about 6.45kg per rim which is lightweight and super strong!

Detail of the tyres:

Tyres are BRIDGESTONE RE750 DOT approved, unfortunately one tyre sidewall got punctured a few weeks ago and I replaced by Yokohama A drive R1.

So that's 3 X 235/40/18 BRIDGETONE RE750 TYRES 85% thread left, 1X YOHOHAMA A DRIVE R1 95% thread left.

Condition:

Very clean except some light wear and tear in stud areas(caused by removing wheel nuts)which is very normal, center and valve stem caps are not included in this sale due to stolen by some boring low life idiots. Volk racing and CE28N and wheel spec and factory quality guarantee stickers still there, except one CE28N sticker came off due to heavy brake dust.

Price: $4500 ono

To Fit: (What car)It will suit EVO 6 to EVO 10 without rubbing,rollling and spacers. Also can be used for Nissan GTR 32,33,34 etc.

Location:Melbourne

Contact:CE28N rims and tyres combo can be inspected by appointment for Melbourne buyers. Please do some homework and research for the price of rims and tyres before making your offer.

Send your offer to me via PM

Comments:Selling due to loss of license for 6 months will get it back until 2009, I will be travelling overseas at end of this month.

R02.jpg

w1-1.jpg

w2-1.jpg

w3.jpg

YR1.jpg

099.jpg

087.jpg

b1.jpg

103.jpg

Pics didnt do the justice! :)

Edited by Skyalwaysblue
femno Grand Master

femno

Posted
Posted

yeah considering theres no centre caps, a sticker missing, and skinny 8.5 width its a bit much...might sell if you drop a little.

also that offset isnt ideal for gtrs esp being only 8.5 wide just so you know.

bump for a tops wheel anyway.

Skyalwaysblue Enthusiast

Skyalwaysblue

Posted
  • Author
Posted
yeah considering theres no centre caps, a sticker missing, and skinny 8.5 width its a bit much...might sell if you drop a little.

also that offset isnt ideal for gtrs esp being only 8.5 wide just so you know.

bump for a tops wheel anyway.

Hi mate

I dont mind about your rude reply, however I hope you could show some respect to the forum members :(

Genuine buyer will contact me via PM so there is no need you tell me what to do.

Good or not buyer will justify that, if buyer after center caps and one missing sticker I can organize that thats not the problem. I can get new one from RAYS JAPAN.

Please keep the for sale thread clean! Thank you! :)

Marko R1 Grand Master

Marko R1

Posted
Posted
yeah considering theres no centre caps, a sticker missing, and skinny 8.5 width its a bit much...might sell if you drop a little.

also that offset isnt ideal for gtrs esp being only 8.5 wide just so you know.

bump for a tops wheel anyway.

i dont think femno is being rude, just upfront & honest that this particular offset will not work on a gtr as i recently bought a set for my gtr

better ppl know what to expect when buying goods

nice wheels though, 1 of my favourites :banana:

Skyalwaysblue Enthusiast

Skyalwaysblue

Posted
  • Author
Posted
i dont think femno is being rude, just upfront & honest that this particular offset will not work on a gtr as i recently bought a set for my gtr

better ppl know what to expect when buying goods

nice wheels though, 1 of my favourites :banana:

It work perfectly on GTR if you have a JDM Hyper Rev tuning magazine you can check it out. will suit 245,255 width tyres as well. Pls do not reply if you are not interested.

Thank you!

Marko R1 Grand Master

Marko R1

Posted
Posted

yes it would work on a gtr but will sit in 8-15mm more than it should in this is not even taking into account the width which is less than recommended 9.5-10"

i.e. optimal offset for r32gtr for example is +15 or +22, with r33/r34gtr the offset would need to be even more aggressive (each to their own i guess)

no harm intended :banana:

WARLORD Veteran

WARLORD

Posted
Posted
yes it would work on a gtr but will sit in 8-15mm more than it should in this is not even taking into account the width which is less than recommended 9.5-10"

i.e. optimal offset for r32gtr for example is +15 or +22, with r33/r34gtr the offset would need to be even more aggressive (each to their own i guess)

no harm intended :banana:

i second that.

Skyalwaysblue Enthusiast

Skyalwaysblue

Posted
  • Author
Posted (edited)
yes it would work on a gtr but will sit in 8-15mm more than it should in this is not even taking into account the width which is less than recommended 9.5-10"

i.e. optimal offset for r32gtr for example is +15 or +22, with r33/r34gtr the offset would need to be even more aggressive (each to their own i guess)

no harm intended :P

If you wanna discuss about offset issue pls start your own thread.If you are not intend to buy no spamming!Thank you!

Edited by Skyalwaysblue

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • albyz34gt
      34 de+t conversion using s2 stagea automatic transmission, engine harness and ecu

      By albyz34gt · Posted

      Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Duncan
      R32 GTS (RB20DE) Injectors Replacement

      By Duncan · Posted

      Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • GTSBoy
      Rear Sway Bar Busshings - Holden Astra TS (2002)

      By GTSBoy · Posted

      I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...