Jump to content
SAU Community

Drafty's

_SimmO_

By _SimmO_,
in WA Wasteland

 Share

Recommended Posts

_SimmO_ Apprentice

_SimmO_

Posted
Posted

Hey all

I noticed around these forums that many skyline drivers in Perth are drafters or work within the building/construction trade. I have been looking to go back to tafe in the coming new year studying residential drafting and have applied to enrol however it has been brought up to me that some companies around perth are actually hiring people to do complete the drafting course but through the company ie. Traineeship. Thus still get paid to do a job and learn it at the same time.

I have searched around for a while now looking to see if some places are considering trainees but it seems the places i have tried already have trainees or dont do the traineeship thing...

Just wanting to know if people know places or anyone who is familiar with this sorta thing or has any info what so ever?

I am really interested in residential drafting and have been putting my resume out there but no luck so far. If it has to come to it i will just see how it goes doing the course next year anyway, might get a job through the tafe....

Cheers

Simon

Link to comment
https://www.sau.com.au/forums/topic/239711-draftys/
Share on other sites
-Dukes- Proficient

-Dukes-

Posted
Posted

Personally I'd go to tafe and do it.

I say that because I've done a traineeship before and I was paid the bare minimum wage and I could barely support myself working full time as a trainee for a year.

Then after it was finished I went to tafe to do a pre-app, which was 1 year, It was sweet because It was 2 whole days a week and 3 half days. so I could have a part time job that payed really good while I studied.

Link to comment
https://www.sau.com.au/forums/topic/239711-draftys/#findComment-4188096
Share on other sites
Stinky Rooster Grand Master

Stinky Rooster

Posted
Posted

I know SFA about residential drafting, but if you need some tips on civil and structural (industrial) traineeships then drop me a PM as I may have some leads for you.

Link to comment
https://www.sau.com.au/forums/topic/239711-draftys/#findComment-4188607
Share on other sites
bubba Grand Master

bubba

Posted
Posted

Residential.. don't do it man! way way back in the day I started out doing some Architectural drafting and later moved onto Structural Detailing in the commercial sector.. dealing with architects AND engineers.. Mining & Resources is where it's at and you only have to deal with engineers where shit only serves a purpose and doesn't have to look pretty!

Link to comment
https://www.sau.com.au/forums/topic/239711-draftys/#findComment-4188659
Share on other sites
GWP021 Veteran

GWP021

Posted
Posted

shit doesnt look pretty in residential bubba its a contest between architects to put the most ueless crap on a perfectly good house thereby doubling the cost

id be nice to have some decent drafties in residential tho half the ones weve got cant even manage to check all their spec sheets off against each other

downpipe on tap on hotwatersystem on bunker light on powerpoint wtf

Link to comment
https://www.sau.com.au/forums/topic/239711-draftys/#findComment-4189213
Share on other sites
inthisglass Grand Master

inthisglass

Posted
Posted

im currently working as a drafty designing residential roofing

DO NOT do it, its not interesting in the slightest and you will want to move on pretty quickly

try and find a job in the mining or resource industry, thats where im headed next year

tafe then a traineeship is the way to go :)

Link to comment
https://www.sau.com.au/forums/topic/239711-draftys/#findComment-4189331
Share on other sites
_SimmO_ Apprentice

_SimmO_

Posted
  • Author
Posted

Thanks guys for all your thoughts,

Mining and Resources are obviously where the big bucks are atm so wat sort of drafty work does that industry have?

I know Residential is all about the houses and making things fit together basically but wat are some better off jobs? Scheduling and Surveying are some that i know of that can be moved onto after drafting. and to be quite honest dont really want to branch out of perth :spank: lol

Link to comment
https://www.sau.com.au/forums/topic/239711-draftys/#findComment-4189389
Share on other sites
Stinky Rooster Grand Master

Stinky Rooster

Posted
Posted

Well, I am mechanical so an example of what we do is design and lay out, say, materials handling systems (conveyors, crushers, ship loaders, that sort of thing) whereas the structural guys have to design and layout all the steel work that supports out gear, and the civil guys lay out and design all the groundworks, drainage, sewerage etc and supporting concrete (that supports the steelwork that supports my crap) if that makes any sense :)

and then you have the electrical and instrument blokes, but no one likes to talk about them :wave:

PM replied too as well. :spank:

Link to comment
https://www.sau.com.au/forums/topic/239711-draftys/#findComment-4189579
Share on other sites
GWP021 Veteran

GWP021

Posted
Posted

mate of mine is a drafty duno what type but he works for one of the boat mobs draws everything from the hulls right down to cabin fitouts does caravans and campers too he recons its pretty good work plenty of different stuff and he gets to do handson every now and then too

Link to comment
https://www.sau.com.au/forums/topic/239711-draftys/#findComment-4189956
Share on other sites
Dani Boi Grand Master

Dani Boi

Posted
Posted

I'm a third year trainee civil design draftsmen. Civil was definately the best choice I've made as there's a lot you can advance in such as detailed road design and all that (no its not just two lines!!). Doing some awesome 3d modelling and all that now :)

IMO I wouldn't do residential. As said before get into resource and energy, that's where the money and all the work is at.

My work (Worleyparsons) is always looking for new people including trainees. I would recommend doing the first semester full time at tafe then apply for your traineeship and do part time study while at work, most companies will reimburse the cost of your studies too!

Link to comment
https://www.sau.com.au/forums/topic/239711-draftys/#findComment-4190361
Share on other sites
bubba Grand Master

bubba

Posted
Posted

I'm a Structural/Mechanical Designer but I mainly do conceptual layouts at the moment, high level stuff, good money, minimal effort :P

The most FUN drafting job I've had was working for an Automotive R&D company.. mucho fun but they couldn't afford to pay the mining & resources rates.

Link to comment
https://www.sau.com.au/forums/topic/239711-draftys/#findComment-4190936
Share on other sites
RedLineFeva Enthusiast

RedLineFeva

Posted
Posted

I have done the residential units of the drafting course at tafe (full time) and got a job drawing up commercial style buildings a lil bit after starting the commercial part of the course at tafe. i switched to part time tafe and get paid the same hourly rate while in class there as i get while in the office.

but...

I'd agree with Danni boi, go for the resource sector and do civil drafting. the resources boom is only just getting started and the houseing boom has stopped.

Link to comment
https://www.sau.com.au/forums/topic/239711-draftys/#findComment-4191881
Share on other sites
_SimmO_ Apprentice

_SimmO_

Posted
  • Author
Posted

i had a look around at several companies and reckon to at least get a better foot in the door before applying for a traineeship would be to start the tafe course as mentioned by a couple of yous above. cheers for the advice cos i was really needing it. ill look at the civil/structural drafting and hopefully commence that in 2009, finger crossed.

Link to comment
https://www.sau.com.au/forums/topic/239711-draftys/#findComment-4192717
Share on other sites
 Share
Go to topic listing


  • Latest Posts

    • Murray_Calavera
      Quieter performance exhausts (or muffler add-on options)

      By Murray_Calavera · Posted

      Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • f00stx
      Quieter performance exhausts (or muffler add-on options)

      By f00stx · Posted

      So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...