Jump to content
SAU Community

Krispy Kreme/ Maccas Cruise To W'gong 2nd Attempt :) 15th November


Recommended Posts

  • Replies 131
  • Created
  • Last Reply

Top Posters In This Topic

Guys,

I should be free for the 15th.

Booyahh!!!

Look forward to seeing you all...I miss the gong.

Mitch, bring Juz

better be able to make it. Ill see if his mum will let him come :(

Gemma cant you make this on a sunday i think it will gather more interest ???

Moei ....

Moei, i would like to as i am really not fussed on the day but i have already changed it once. if all the ppl who have already said they would come says they can come on the sun then im more than happy to change it

Can you please change it to the sunday Mchappy day is on the 15th and Im doing charity all day,,,:P but i know im not known but it would be really cool if you change the date so i can come andmet some of you's.

DAMMIT..noo..i can't come no more.

I gotta work that weekend...but all my boys are goin ..and a few random invites from facebook.

So yeh..Really bummed..but i hope u guys have fun.

i have sussed the situation out and sorry but saturday stands. the list of ppl coming (hopefully) is as follows:

J4M35

Justin

Shane

Jeff

5hu70

Alien

gizzmo

MRXTC

Bored33

FIGJAM

davib

RJ's boys

andd me :huh:

Bored33

i might come aye.. wanna meet up before hand with a couple other Ctown'ers? lol

andreww im coming if you want to meet here and cruise to livo or something

Sounds good to me guys, want to PM me your numbers and organise a time and place to meet up? Although I do have Jeffs already so it mainly applies to you Palmer haha.

Sounds good to me guys, want to PM me your numbers and organise a time and place to meet up? Although I do have Jeffs already so it mainly applies to you Palmer haha.

Anyone Wanna Take Me??? Mitch Probally Will Dog It! C-Town Boy here :)

Juz, no one wants to take you.... Ill confirm my spot next week.... girls always seem to want to ruin car events.... well not all of them, just the ones that i know.

Anyway ill let you know as time goes by, Juz if im there ill take you.

Juz, no one wants to take you.... Ill confirm my spot next week.... girls always seem to want to ruin car events.... well not all of them, just the ones that i know.

Anyway ill let you know as time goes by, Juz if im there ill take you.

He he. well u gotta get out more cause funnily enough, im a girl and am telling u that u have to go on the cruise..... No car stuff ruining here :):D

Just for those who wanted to meet up in Campbelltown before heading up to Liverpool, are you guys ok with meeting at Leumeah McDonalds (opposite the skate park) around 10:30am?

At this stage im back in, but i wont be able to make it until 11:30ish... i got kickboxing in the morning. Juz if you get to leumeah station round 11 ill give you a lift.




  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...