Jump to content
SAU Community

Krispy Kreme/ Maccas Cruise To W'gong 2nd Attempt :) 15th November


Recommended Posts

  • Replies 131
  • Created
  • Last Reply

Top Posters In This Topic

Wow, no one had a white one (well not in those pics), should have come along, would have been good for some contrast. Shame my car is in pieces. Whens the next one in the new year some time?

Pete

Hey guys

Was a good cruise considering the shitty weather. Took just over 900 photos during the day, but only uploaded 100... randomly chosen.

http://www.teamgame.com.au/storage/GongCruise/

Enjoy

Y wont you have your car man?

Planning to upgrade man.

oopps jut aw the 34 and aumed. who is then then?

That post was all over the shop but I will help you out because I am just that anal retentive :D

"oops just saw the 34 and assumed. who is this then?" Maybe you meant "who are you" haha I dont know. I am bloody tired and bloody sticky due to this bloody humid weather.

where did all u guys meet upbefore the cruise?

Cas my boys did turn up?

Time? Location?

hye RJ, i was at the KK/maccas (meeting place) car park from 10.45 am till when we left at 11.45am. and noone came looken. So dont think they showed. sorry. and it was hard to miss us there was about 7 'lines in a row




  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...