Jump to content
SAU Community

Recommended Posts

High idle will affect your economy a lot if you do a lot of stop-start traffic. Try getting it down below 800. Other than that, just do the usual stuff - replace plugs, clean injectors, etc. Does the R30 use an AFM? If so try cleaning it with some electrical contact cleaner.

Link to comment
https://www.sau.com.au/forums/topic/24173-economy/#findComment-519838
Share on other sites

Aftern owning a sr20de silvia for 3 years and getting around 450ks from 45L of fuel it was a big shock how much fuel my r33 uses. The best figures i have gotten are 11L/100ks on highway driving. I average 13.5L/100k in the city but have had it as high as 18L/100ks after a night of hard driving. I guess a relativly heavy car and a 6cyl turbo doesnt help with fuel consumption.

Link to comment
https://www.sau.com.au/forums/topic/24173-economy/#findComment-525244
Share on other sites

The best ive ever got from my R30 was something over 400kms out of a full tank. Prettymuch i trash it everywhere, so i dont think thats too bad.

Things that i have done are, new plugs, leads, rotor button and distributor cap.

Other things that will help are cleaning the injectors (one of the best things is to put a bout 250mls of Auto-Trans fluid in the tank next time you fill it up), between doing this and replacing the fuel filter it will make a big diference.

The other thing that everyone with a L24E in a R30 should do is to cut the airbox.

I removed the shitty restrictive cold air feed piece of crap and cut a big hole in the top of the airbox, ill post pics soon.

This made a big diference in power, its much quicker, revs smoother and sounds totaly nuts. I couldnt beleive the diference it made. with the standard exhaust still in place i (Quiet out the back) i have had people ask me if its a V8, others are convinced there is a hole in my exhaust! dickheads.

seriously try going for a drive, just take the airbox lid off and go for a quik spin, youll know what im talking about.

Link to comment
https://www.sau.com.au/forums/topic/24173-economy/#findComment-532038
Share on other sites

  • 3 weeks later...

oh man i love you that sounds awsome. Although I have experienced another problem wif 2nd gear this is with cap to. Ok I accelerate fast in first to about 4 - 5k rpm, then i change to 2nd and put my foot down........................ LAg WTf?!? it like does nothing doesnt rev or no power, a dead spot for about half to 1 sec, insanley gay. i have new distrbtor cap, leads, plugs, fuel filter oil filter and this gay thing happens what to do????

Link to comment
https://www.sau.com.au/forums/topic/24173-economy/#findComment-554448
Share on other sites

ive noticed since installing new plugs, NGK iridium's and changed oil to the new mobile 1 - super synth and ive actually lost 50-70Km's per tank!!! not sure what going on here! will the wrong gap affect fuel consumption?

will try normal mobile 1 next and see if i get it back!

Link to comment
https://www.sau.com.au/forums/topic/24173-economy/#findComment-558259
Share on other sites

yeah i used to get atleast 450Km out of it, but now about 350 - 380 Km's even with highway driving, so i'll check it out!!

noticed alot more noise in the engine since the super synth mobil 1 went in, so see how this affects the sitution before regapping, as fuel consumption was (i think) ok before the oil change!!

Link to comment
https://www.sau.com.au/forums/topic/24173-economy/#findComment-561189
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...