Greddy Coilovers Bnr32 Gtr

[DRFTAE86]

Hey guys i have brand New GReddy Type S Coil Overs. I bought these recently from a ebay seller but they were incorrectly listed for an ER34. They DO NOT fit an ER34!~ So they are of no use to me. Unfortunetly i had already payed for them and it was to much of a mess around to get my money back.

I took the set to a GReddy dealer with a part number obtained from the previous owner. With the help of the GReddy dealer, the part number given indicated they are for a R32 GTR. (Part number: 14022204). The spring rate listed is also 8kgs front and 6 kgs rear.

The studs on one of the top hats is also a little smaller in diameter to the other side at the front for some reason? Which is still usable as is, has no affect on the installation or use of the coilovers. But if you aren't satisfied you could just replace the studs with the right size or use your own top hats as i was told by greddy.

This set will also supposedly fit a HNR32 (non GTR R32) as well.

This set has never been driven on. I did *try* fit them to my R34 for, but it became quickly clear there were slight differences so they could not be installed. So they are virtually out of the box!

This set retails for $2020 and thats when the AUS dollar was still strong. With the current exchange rate the set would cost closer to $3000! So grab your self a bargain!

Feel free to ask me any questions ill try help best i can. If you need measurements or things like that just let me know. Also inspections are welcome. I'm not too familiar with skylines.

Location: Melbourne South East.

Postage available at buyers expense.

Price: $1400