Jump to content
SAU Community

Recommended Posts

no problems! if you have a factory tv/sat nav. its the one behind the glovebox. so thats not the CPU youre after incase you see that instead

If you have TV/Nav, the CPU is ...................?

I thought it was in the passengers kick panel but I have seen another diagram where it shows it behind/above the glove box.

Which one is right?

if we are referring to the engine one- behind glovebox on ALL cars. the one inthe passenger kick is the auto or CVT ECU. the navi unit is the DVD rom above the glove box.

if you have a special ECU the label will be on top of it. bear in mind the car may not pass emissions with it in there...

if we are referring to the engine one- behind glovebox on ALL cars. the one inthe passenger kick is the auto or CVT ECU. the navi unit is the DVD rom above the glove box.

if you have a special ECU the label will be on top of it. bear in mind the car may not pass emissions with it in there...

Thanks Chris

Cheers

Andy

if we are referring to the engine one- behind glovebox on ALL cars. the one inthe passenger kick is the auto or CVT ECU. the navi unit is the DVD rom above the glove box.

if you have a special ECU the label will be on top of it. bear in mind the car may not pass emissions with it in there...

Inside my glove box there is a dvd player and a etc devise.

wow so im totally wrong?

when i had the glovebox out there were 3 vertically mounted 'ECUs'. i just assumed the one in the bottom left in the kick panel was the engine ECU?? had a wire spliced for something going one above it - which i assumed to be the gearbox ecu. and finally the one actually mounted behind the glovebox was for the TV goodies....

so which ones which?? (sorry if that seemed rude i would really like to know)

I'll post a shot up over the next day or so (I have a '03 coupe here so it will be that one.)

Excellent thanks.

I checked it out today and opened the glove box and found a comparment but did see anything looking like a ecu . Maybe its because i dont know what a ecu looks like.

If it does have the after market impul cpu what does that mean in terms for compliance ,does that mean i have to get a standard ecu and then change them after registration and if i can change it back how do i get it re-tuned ?

Perhaps some photo's will help some of us advise of what you may or may not be looking at...

I have no pics of the glove box . But i went to see the car today and its getting ready for compliance he said the alloy wheels will need to be replaced and the exhuast system back to standard. I didnt mention anything about the cpu . When i open the glove box it folds out and its empty then i look up towards where the dvd player sits and there is a silver metal bracket there is that it?

What emissions mean and how much does it usually cost to comply a car i feel like im getting a raw deal.

Excellent thanks.

I checked it out today and opened the glove box and found a comparment but did see anything looking like a ecu . Maybe its because i dont know what a ecu looks like.

If it does have the after market impul cpu what does that mean in terms for compliance ,does that mean i have to get a standard ecu and then change them after registration and if i can change it back how do i get it re-tuned ?

On the passenger side there are two openings (gloveboxes for lack of a better term) the top one folds up. In this one the 2 things that seem to be in many v35 & M35's are the DVD rom for the SAT NAV. This is not a DVD player for movies. The second, is usually the ETC device. This is an electronic toll device for Japanese roads.

The lower glove box folds down but there is nothing in this box. You will need to remove the glove box to get at the CPU for the motor.

This is a link to a page that shows how to remove various parts of the dash to access much of this area. http://g35ipod.com/installHW.php?skin=1

Under the glove box is a black kick pannel that is above your feet when sitting in the passenger seat. (this also holds the flare if you have one). This just pulls down from the leading edge. You can see the CPU above this.

Cheers

Andy

On the passenger side there are two openings (gloveboxes for lack of a better term) the top one folds up. In this one the 2 things that seem to be in many v35 & M35's are the DVD rom for the SAT NAV. This is not a DVD player for movies. The second, is usually the ETC device. This is an electronic toll device for Japanese roads.

The lower glove box folds down but there is nothing in this box. You will need to remove the glove box to get at the CPU for the motor.

This is a link to a page that shows how to remove various parts of the dash to access much of this area. http://g35ipod.com/installHW.php?skin=1

Under the glove box is a black kick pannel that is above your feet when sitting in the passenger seat. (this also holds the flare if you have one). This just pulls down from the leading edge. You can see the CPU above this.

Cheers

Andy

Thanks for your help . The dvd player inside the glove box does play movies . I already tried it and it worked fine sound through the speakers and all. I have a aftermarket screen and dvd player install its panasonic. And i also have the etc collection thingy.

post-55737-1225799794_thumb.jpg

On the passenger side there are two openings (gloveboxes for lack of a better term) the top one folds up. In this one the 2 things that seem to be in many v35 & M35's are the DVD rom for the SAT NAV. This is not a DVD player for movies. The second, is usually the ETC device. This is an electronic toll device for Japanese roads.

The lower glove box folds down but there is nothing in this box. You will need to remove the glove box to get at the CPU for the motor.

This is a link to a page that shows how to remove various parts of the dash to access much of this area. http://g35ipod.com/installHW.php?skin=1

Under the glove box is a black kick pannel that is above your feet when sitting in the passenger seat. (this also holds the flare if you have one). This just pulls down from the leading edge. You can see the CPU above this.

Cheers

Andy

Sorry i forgot to mention i have two flares one in the holder on the passagener side and another one was rolling around in the boot

Excellent thanks.

I checked it out today and opened the glove box and found a comparment but did see anything looking like a ecu . Maybe its because i dont know what a ecu looks like.

If it does have the after market impul cpu what does that mean in terms for compliance ,does that mean i have to get a standard ecu and then change them after registration and if i can change it back how do i get it re-tuned ?

WHO IS DOING THE CAR??

PM me. and I'll tell you.

I have no pics of the glove box . But i went to see the car today and its getting ready for compliance he said the alloy wheels will need to be replaced and the exhuast system back to standard. I didnt mention anything about the cpu . When i open the glove box it folds out and its empty then i look up towards where the dvd player sits and there is a silver metal bracket there is that it?

What emissions mean and how much does it usually cost to comply a car i feel like im getting a raw deal.

$2600 or so. again who is doing it? PM me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When sanding across a convex panel, you need to sand, as much as possible, at right angles to the curve. If the panel is compound convex curved (ie curved in both directions) then you are SOL and have to use "craftsmanship" to get it right.
    • Today in Skyline arts and crafts!! I鈥檝e made some progress.    had to put extra notes in there so I don鈥檛 stuff it up 馃槀
    • This sounds like me. And then why I leave shit that I had previously hobbled together broken. Lately I've changed strategies to "If I don't want to justify the money on decent stuff, I'm not going to justify hobbling it together". I'm still for DIY, but DIY it properly is more my thing. However, I am terrible on not setting up backups still... Which reminds me, I need to go backup some of my work VM machines... Oh, it's also why I've become a lover of building things into Docker Containers... Then I just need a machine that can run docker, and bam, that specific system is up and running, on the specific versions of everything I need for it to run (In the event a change in required software version breaks something else). Also, these days, my steep learning curves are spent with work related stuff, and on very varied projects, that my want to do other random projects like build a dashboard for my own car has dwindled away to "I just want the car running", which is my current PITA, as I'm getting the Landcruiser usable again, and it has just been non-stop the past 6 to 8 weeks of buying parts, and working on it. Oh, and tools that are meant to be fit for purpose... And they break, because 25 year old 4WD decides it's stronger... But by the time I have it ready to roll back out the drive way, nearly all the stuff in it will have been touched and serviced, so the damn thing better give me NO FREAKING ISSUES, for at least the next 50,000KMs! Just redone whole front of the motor, and resealed the up top stuff, replaced a bunch of things getting perished, new timing belt done, water pump, lower timing cover (Toyota diesel engine runs timing GEARS for the bottom half the motor, and a timing belt from halfway up to the top), new harmonic balancer, fix up the alternator, new thermostat, full swivel hub rebuild, new bearings and seals front and back, steering box rebuild, new battery, and today, it turns out a rear shock has let go, so four new shocks are about to go on order, and that will leave me with after the next run of work, to see if I need to order just a brake caliper re-seal, or if I'll need new pistons in them too. Oh, and I'll finish welding in the new floor sheet metal shortly too. Presently I just want it finished already... But once all the above is done, I still need to fully service diffs, gearbox, transfer, and motor. Then flush and bleed the clutch, and flush and bleed the brakes. But enough about our waffle, back to Duncan's heat problems... I think for Duncan he just gets a thermoswitch, and a manual switch to run some water misters. Thermo so it's only on above certain temps, and the manual switch so it can be turned off even if it is above certain temperatures. IE, switch on for "I'm now on track", then it doesn't need any "smart" computers that might try and do things wrong. And switch the thing off completely on the cool down lap, so when he stops in pits, there's not even a possibility of it dripping any water out to get him in trouble.
    • So I ran into the same problem. I got stuck in the cycle of again of putting putty sanding it, putting putty sanding it, because of a low spot. And notice my block is not completely flat with the panel, even though it's a long block. My panel is slightly curved. Is this an issue? Do I need something that matches the door perfectly, or no?    I do have the smaller flexible block that covers the width of the repair just not the length, I was experimenting with it again to but seems to be the same issue
  • Create New...