Jump to content
SAU Community

Recommended Posts

no problems! if you have a factory tv/sat nav. its the one behind the glovebox. so thats not the CPU youre after incase you see that instead

If you have TV/Nav, the CPU is ...................?

I thought it was in the passengers kick panel but I have seen another diagram where it shows it behind/above the glove box.

Which one is right?

if we are referring to the engine one- behind glovebox on ALL cars. the one inthe passenger kick is the auto or CVT ECU. the navi unit is the DVD rom above the glove box.

if you have a special ECU the label will be on top of it. bear in mind the car may not pass emissions with it in there...

if we are referring to the engine one- behind glovebox on ALL cars. the one inthe passenger kick is the auto or CVT ECU. the navi unit is the DVD rom above the glove box.

if you have a special ECU the label will be on top of it. bear in mind the car may not pass emissions with it in there...

Thanks Chris

Cheers

Andy

if we are referring to the engine one- behind glovebox on ALL cars. the one inthe passenger kick is the auto or CVT ECU. the navi unit is the DVD rom above the glove box.

if you have a special ECU the label will be on top of it. bear in mind the car may not pass emissions with it in there...

Inside my glove box there is a dvd player and a etc devise.

wow so im totally wrong?

when i had the glovebox out there were 3 vertically mounted 'ECUs'. i just assumed the one in the bottom left in the kick panel was the engine ECU?? had a wire spliced for something going one above it - which i assumed to be the gearbox ecu. and finally the one actually mounted behind the glovebox was for the TV goodies....

so which ones which?? (sorry if that seemed rude i would really like to know)

I'll post a shot up over the next day or so (I have a '03 coupe here so it will be that one.)

Excellent thanks.

I checked it out today and opened the glove box and found a comparment but did see anything looking like a ecu . Maybe its because i dont know what a ecu looks like.

If it does have the after market impul cpu what does that mean in terms for compliance ,does that mean i have to get a standard ecu and then change them after registration and if i can change it back how do i get it re-tuned ?

Perhaps some photo's will help some of us advise of what you may or may not be looking at...

I have no pics of the glove box . But i went to see the car today and its getting ready for compliance he said the alloy wheels will need to be replaced and the exhuast system back to standard. I didnt mention anything about the cpu . When i open the glove box it folds out and its empty then i look up towards where the dvd player sits and there is a silver metal bracket there is that it?

What emissions mean and how much does it usually cost to comply a car i feel like im getting a raw deal.

Excellent thanks.

I checked it out today and opened the glove box and found a comparment but did see anything looking like a ecu . Maybe its because i dont know what a ecu looks like.

If it does have the after market impul cpu what does that mean in terms for compliance ,does that mean i have to get a standard ecu and then change them after registration and if i can change it back how do i get it re-tuned ?

On the passenger side there are two openings (gloveboxes for lack of a better term) the top one folds up. In this one the 2 things that seem to be in many v35 & M35's are the DVD rom for the SAT NAV. This is not a DVD player for movies. The second, is usually the ETC device. This is an electronic toll device for Japanese roads.

The lower glove box folds down but there is nothing in this box. You will need to remove the glove box to get at the CPU for the motor.

This is a link to a page that shows how to remove various parts of the dash to access much of this area. http://g35ipod.com/installHW.php?skin=1

Under the glove box is a black kick pannel that is above your feet when sitting in the passenger seat. (this also holds the flare if you have one). This just pulls down from the leading edge. You can see the CPU above this.

Cheers

Andy

On the passenger side there are two openings (gloveboxes for lack of a better term) the top one folds up. In this one the 2 things that seem to be in many v35 & M35's are the DVD rom for the SAT NAV. This is not a DVD player for movies. The second, is usually the ETC device. This is an electronic toll device for Japanese roads.

The lower glove box folds down but there is nothing in this box. You will need to remove the glove box to get at the CPU for the motor.

This is a link to a page that shows how to remove various parts of the dash to access much of this area. http://g35ipod.com/installHW.php?skin=1

Under the glove box is a black kick pannel that is above your feet when sitting in the passenger seat. (this also holds the flare if you have one). This just pulls down from the leading edge. You can see the CPU above this.

Cheers

Andy

Thanks for your help . The dvd player inside the glove box does play movies . I already tried it and it worked fine sound through the speakers and all. I have a aftermarket screen and dvd player install its panasonic. And i also have the etc collection thingy.

post-55737-1225799794_thumb.jpg

On the passenger side there are two openings (gloveboxes for lack of a better term) the top one folds up. In this one the 2 things that seem to be in many v35 & M35's are the DVD rom for the SAT NAV. This is not a DVD player for movies. The second, is usually the ETC device. This is an electronic toll device for Japanese roads.

The lower glove box folds down but there is nothing in this box. You will need to remove the glove box to get at the CPU for the motor.

This is a link to a page that shows how to remove various parts of the dash to access much of this area. http://g35ipod.com/installHW.php?skin=1

Under the glove box is a black kick pannel that is above your feet when sitting in the passenger seat. (this also holds the flare if you have one). This just pulls down from the leading edge. You can see the CPU above this.

Cheers

Andy

Sorry i forgot to mention i have two flares one in the holder on the passagener side and another one was rolling around in the boot

Excellent thanks.

I checked it out today and opened the glove box and found a comparment but did see anything looking like a ecu . Maybe its because i dont know what a ecu looks like.

If it does have the after market impul cpu what does that mean in terms for compliance ,does that mean i have to get a standard ecu and then change them after registration and if i can change it back how do i get it re-tuned ?

WHO IS DOING THE CAR??

PM me. and I'll tell you.

I have no pics of the glove box . But i went to see the car today and its getting ready for compliance he said the alloy wheels will need to be replaced and the exhuast system back to standard. I didnt mention anything about the cpu . When i open the glove box it folds out and its empty then i look up towards where the dvd player sits and there is a silver metal bracket there is that it?

What emissions mean and how much does it usually cost to comply a car i feel like im getting a raw deal.

$2600 or so. again who is doing it? PM me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...