Jump to content
SAU Community

Recommended Posts

no problems! if you have a factory tv/sat nav. its the one behind the glovebox. so thats not the CPU youre after incase you see that instead

If you have TV/Nav, the CPU is ...................?

I thought it was in the passengers kick panel but I have seen another diagram where it shows it behind/above the glove box.

Which one is right?

if we are referring to the engine one- behind glovebox on ALL cars. the one inthe passenger kick is the auto or CVT ECU. the navi unit is the DVD rom above the glove box.

if you have a special ECU the label will be on top of it. bear in mind the car may not pass emissions with it in there...

if we are referring to the engine one- behind glovebox on ALL cars. the one inthe passenger kick is the auto or CVT ECU. the navi unit is the DVD rom above the glove box.

if you have a special ECU the label will be on top of it. bear in mind the car may not pass emissions with it in there...

Thanks Chris

Cheers

Andy

if we are referring to the engine one- behind glovebox on ALL cars. the one inthe passenger kick is the auto or CVT ECU. the navi unit is the DVD rom above the glove box.

if you have a special ECU the label will be on top of it. bear in mind the car may not pass emissions with it in there...

Inside my glove box there is a dvd player and a etc devise.

wow so im totally wrong?

when i had the glovebox out there were 3 vertically mounted 'ECUs'. i just assumed the one in the bottom left in the kick panel was the engine ECU?? had a wire spliced for something going one above it - which i assumed to be the gearbox ecu. and finally the one actually mounted behind the glovebox was for the TV goodies....

so which ones which?? (sorry if that seemed rude i would really like to know)

I'll post a shot up over the next day or so (I have a '03 coupe here so it will be that one.)

Excellent thanks.

I checked it out today and opened the glove box and found a comparment but did see anything looking like a ecu . Maybe its because i dont know what a ecu looks like.

If it does have the after market impul cpu what does that mean in terms for compliance ,does that mean i have to get a standard ecu and then change them after registration and if i can change it back how do i get it re-tuned ?

Perhaps some photo's will help some of us advise of what you may or may not be looking at...

I have no pics of the glove box . But i went to see the car today and its getting ready for compliance he said the alloy wheels will need to be replaced and the exhuast system back to standard. I didnt mention anything about the cpu . When i open the glove box it folds out and its empty then i look up towards where the dvd player sits and there is a silver metal bracket there is that it?

What emissions mean and how much does it usually cost to comply a car i feel like im getting a raw deal.

Excellent thanks.

I checked it out today and opened the glove box and found a comparment but did see anything looking like a ecu . Maybe its because i dont know what a ecu looks like.

If it does have the after market impul cpu what does that mean in terms for compliance ,does that mean i have to get a standard ecu and then change them after registration and if i can change it back how do i get it re-tuned ?

On the passenger side there are two openings (gloveboxes for lack of a better term) the top one folds up. In this one the 2 things that seem to be in many v35 & M35's are the DVD rom for the SAT NAV. This is not a DVD player for movies. The second, is usually the ETC device. This is an electronic toll device for Japanese roads.

The lower glove box folds down but there is nothing in this box. You will need to remove the glove box to get at the CPU for the motor.

This is a link to a page that shows how to remove various parts of the dash to access much of this area. http://g35ipod.com/installHW.php?skin=1

Under the glove box is a black kick pannel that is above your feet when sitting in the passenger seat. (this also holds the flare if you have one). This just pulls down from the leading edge. You can see the CPU above this.

Cheers

Andy

On the passenger side there are two openings (gloveboxes for lack of a better term) the top one folds up. In this one the 2 things that seem to be in many v35 & M35's are the DVD rom for the SAT NAV. This is not a DVD player for movies. The second, is usually the ETC device. This is an electronic toll device for Japanese roads.

The lower glove box folds down but there is nothing in this box. You will need to remove the glove box to get at the CPU for the motor.

This is a link to a page that shows how to remove various parts of the dash to access much of this area. http://g35ipod.com/installHW.php?skin=1

Under the glove box is a black kick pannel that is above your feet when sitting in the passenger seat. (this also holds the flare if you have one). This just pulls down from the leading edge. You can see the CPU above this.

Cheers

Andy

Thanks for your help . The dvd player inside the glove box does play movies . I already tried it and it worked fine sound through the speakers and all. I have a aftermarket screen and dvd player install its panasonic. And i also have the etc collection thingy.

post-55737-1225799794_thumb.jpg

On the passenger side there are two openings (gloveboxes for lack of a better term) the top one folds up. In this one the 2 things that seem to be in many v35 & M35's are the DVD rom for the SAT NAV. This is not a DVD player for movies. The second, is usually the ETC device. This is an electronic toll device for Japanese roads.

The lower glove box folds down but there is nothing in this box. You will need to remove the glove box to get at the CPU for the motor.

This is a link to a page that shows how to remove various parts of the dash to access much of this area. http://g35ipod.com/installHW.php?skin=1

Under the glove box is a black kick pannel that is above your feet when sitting in the passenger seat. (this also holds the flare if you have one). This just pulls down from the leading edge. You can see the CPU above this.

Cheers

Andy

Sorry i forgot to mention i have two flares one in the holder on the passagener side and another one was rolling around in the boot

Excellent thanks.

I checked it out today and opened the glove box and found a comparment but did see anything looking like a ecu . Maybe its because i dont know what a ecu looks like.

If it does have the after market impul cpu what does that mean in terms for compliance ,does that mean i have to get a standard ecu and then change them after registration and if i can change it back how do i get it re-tuned ?

WHO IS DOING THE CAR??

PM me. and I'll tell you.

I have no pics of the glove box . But i went to see the car today and its getting ready for compliance he said the alloy wheels will need to be replaced and the exhuast system back to standard. I didnt mention anything about the cpu . When i open the glove box it folds out and its empty then i look up towards where the dvd player sits and there is a silver metal bracket there is that it?

What emissions mean and how much does it usually cost to comply a car i feel like im getting a raw deal.

$2600 or so. again who is doing it? PM me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...