Jump to content
SAU Community

Recommended Posts

if its miniture just touch it up...

if its major then you really HAVE to paint the entire panel to make it look stock. (panel doesn't mean the entire side of the car, maybe just the door, or just the front guard etc...)

probably about $100 - 150 per panel

A GOOD paint shop will charge around $300 for a panel or front/rear bar. This includes blending the paint into the adjacent panels. You can probably get a quick respray for less but you will probably notice the difference in colour.

You can try one of those scratch repair places, but in my experience they will only touch non-metallic colours, because they can't get the touch-up paint to blend properly on metallic paint.

You can also touch it up yourself, which I've done on mine for a couple of scratches it's picked up. It's easily noticable if you look at them, but if you just look at the car overall your eyes don't get drawn towards them and you can't really notice.

I got a bit of leftover paint from my respray. It's not proper touch up paint, and as such I can't use that Langka stuff to rub it back with. I just dabbed some on, let it dry, then dabbed a bit more on, etc. It's now almost flush and so harder to notice. But because it's metallic, it'd be noticable even if I did get it flush.

If you want proper touch up paint, try the various auto parts shops. You might need the paint code off your car, or maybe just telling them it's a silver Skyline might be enough for them to find the right one.

Originally posted by JimX

A GOOD paint shop will charge around $300 for a panel or front/rear bar. This includes blending the paint into the adjacent panels.  

Can you still notice the difference in colour for blending the paint?

and how much for respray in white?(milk white???i dont know the term)

A full respray is usually around $3000 or so. More if you want funky colours (pearl etc) or a more than average amount of coats.

I've had experience of a well-done paint blend on my previous car, and I have to say that YOU will notice it, but no one else will until you point it out :( The paint in the resprayed area just looks a little darker/newer, but unless you are very carefully looking for it, you won't notice it.

At one point I managed to dent the rear passenger door fairly badly, and I replaced it with one from a wrecker of the same colour without respraying it. The guy that bought the car looked the car over very carefully but didn't notice the colour change from either the paint blend OR the door change, even though to me both stuck out like a sore thumb.

BG Automotive at Meadowbank is where I got my Skyline resprayed after I got rear-ended. Phone number 9807 6502 or 0414 842 652. I think it should usually be done in around 2 weeks or less.

The place I got my Commodore done at is out of business, but he was also quite good.

padboy if u want to get the right colour paint for ur car go to vg paints at girraween . u need to take with u the colour code ( u 'll find on the cars id plate under the bonnet ) and ur fuel filler door , ask for acrylic paint they will mix the paint for u and for a small fee will match it as well ( i/2 lt mix and match silver is $25 - 30 ) u can use the paint to touch up u r scratches and stone chips . if u want to paint a panel if u never done it before dont try u will stuff it up .

jimx when a pro paints a panel and blends ( u can only blend metalic paint ) u should never notice the diff in the colour if u do its not a good job , i have done plenty and u can never see the diff but metalic paint u have to blend and then u give it a coat of clear to cover the whole panel .

when it comes to painting i/4 panels is more difficult cause u cant paint the whole panel u have to blow it off in to the edge of the roof and as the paint gets a bit old u 'll see where they blow it off , if u try to buf it there it will get worse the more u buf the more u 'll see it . the guys that do touch up jobs its crap u try to polish there and u'll see an edge the more u polish the worse it gets thats why u paint full panels thats the proper way of doing it

touching up is like cheating if u want to sell the car .

Originally posted by wrxhoon

jimx when a pro paints a panel and blends ( u can only blend metalic paint ) u should never notice the diff in the colour if u do its not a good job , i have done plenty and u can never see the diff but metalic paint u have to blend and then u give it a coat of clear to cover the whole panel .

The thing is a keen eye can always spot the difference between old and new paint. Even if it's the exact same colour, you'll never get it perfect. I can always spot resprayed panels, unless the old paint was only like 1-2 years old. The old paint on my Commodore was 5 or 6 years old, and there's no way to get new paint to look the exact same as paint that old. If nothing else it was the only panel without any stone chips on it :(

Like I said, the guy that bought my car looked over it very very carefully from all angles in broad daylight and he couldn't tell. It's probably just one of those things where if you know it's there, you can tell, but if you don't, you can't.

padboy by all means buy the paint to do small touch ups with a very fine brush , u will always see it though but better than having the chips or a small scratch there .

if u wnt a proper job done take it to a pro ( unless u done it before ) and have the whole panel pained , i hope that clears this up for u .

jimx a good painter will match the paint to the old one it doent matter of the age . its not going to be the same colour thats why u blend it in . iven if its the same paint u put on the car the day before and another person paints the panel next to it with that same paint chances are that it will be diff ( like darker or lighter ) the diff u'll see where the panels join.thats the reason when u repair the whole say front door u blend in the rear door and the guard . so u paint full colout the repaired door then full colour the front guard near where the door joins and as u go forward the u put less paint until at the end and near the bonnet no paint at all . u do the same with the rear door then u put a clear coat on the 2 doors and the guard . if the colour was close u can never see the diff as it is blende in with the original paint , got it ?

believe me i have done plenty of them , metalics are easy to match cause u can blend u cant do that with solid colous though .

  • 2 weeks later...

just respray the full panel. but dont do what i did and then scratch it on the side of your house a week later and have to do it again. my mate is a panel beater so its cheap for me but twice in one week is still not cool. about $100 a pop (normally $200 for a door).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
    • OK, so a bunch of trim needs to come off to get to the rear shock top mounts. Once the seat is out of the way, the plastic trim needs to come off. Remove 2 clips at the top then slide the trim towards the centre of the car to clear the lower clip Next you need to be able to lift the parcel shelf, which means you need to remove the mid dark trim around the door, and then the upper light trim above the parcel shelf. The mid trim has a clip in the middle to remove first, then lift the lowest trim off the top of the mid trim (unclips). At the top there is a hidden clip on the inner side to release first by pulling inwards, then the main clip releases by pulling the top towards the front of the car. The door seal comes off with the trim, just put them aside. The the lighter upper trim, this is easy to break to top clips so take it carefully. There is a hidden clip towards the bottom and another in the middle to release first by pulling inwards. Once they are out, there are 3 clips along the rear windscreen side of the panel that are hard to get under. This is what the rear of the panel looks like to assist:
×
×
  • Create New...