Jump to content
SAU Community

Recommended Posts

Mark - they look very similar to my Roadholder bars, down to the clear plastic wrapping.

Mine used the stock bushings, though. I also get the feeling they're thicker, but I'll have to measure to be sure.

That said, if you're going to coilovers with higher spring rates, that's not an issue. I found my bars to be great with stock springs / Koni dampers (I had them set to full stiff), but even with them dialled down to full soft the car is a bit skatey.

Edited by scathing

hrmmm

i allready have a set of hks bars which i am taking delivery of shortly,

i had roadholder bars on my S15 and they were great, even good for the price too.

alan, if you can find the thickness of the roadholder bar it would be great

on another note, i am running tein comfort sport coilovers

  • 4 weeks later...
will this decrease the lowest point of the car by any chance?

shouldn't. They are the same shape as the original just solid in stead of hollow and the diameter may be thicker. Not sure of the diameter being used on V35. They are a great improvement to handling on the M35.

Cheers

Andy

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...