Jump to content
SAU Community

Recommended Posts

pretty much just want a lip to fit onto my stock series 2 r32 gtst front bar. would finish off my car nicely. don't really want to go gtr because its too expensive plus everyone is going that route and i also want to keep my fog lights as i reckon they work pretty good. any ideas guys?

Link to comment
https://www.sau.com.au/forums/topic/243776-r32-gtst-front-bar-lips/
Share on other sites

damn that looks sick but no its not the aero option bar...its just he standard series 2 bar...if anything i wouldn't want it to be that low on my car though because my car is lowered already..i reckon the thing would be not to far from the ground.

i jsut want a little lip like the gtr lip. like are there honda lips that could work? how about the 180 CA front lips?

n651700946_1256062_4895.jpg

thats the bar i'm talking about...i reckon they would look good with a lip

Ah in that case, there are a few options for that front bumper :bunny:

I've got that front bar as well, and was looking for a front lip too. I ended up getting the standard auto drop down lip and customizing it slightly so it could be mounted like a normal lip.

This is what I came up with after fitting and painting it up

s5003398hz1.th.jpg

s5003392on9.th.jpg

If you want something that wraps around the bar from wheel arch to wheel arch, then there is this one available on Yahoo, starting at ~$90 (shipping would be nice and cheap too, as it's 2 piece)

600x450-2008101100003.jpg

Link to auction

There is also another lip for that front bar I've found, but if you're looking for something that doesn't sit too low and doesn't stand out like dogs balls, it's probably not for you :blink: (not to mention it's over $400 before shipping :))

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...