Jump to content
SAU Community

Wtb: Atermarket Injectors And Nismo Or Sard Fuel Reg For My R32 Gtr

GTRBOS

By GTRBOS,
in Wanted to Buy

 Share

Recommended Posts

GTRBOS Mentor

GTRBOS

Posted
Posted

hey guys im on the market for aftermarket injectors for my r32 gtr, power im after is 350+kw and after brand new injectors, also on the market for a fuel reg, was thinking of sard 700cc injectors but also got some advice and people saying the nismo 740cc injectors are pretty good, guys please let me know what i should begeting for my ghtr, my car has all the supporting mods like power fc, dumps, fornt and cat back, sard 280l/hr pump, trust 100mm cooler, greddy cam gears and the z32 afms all ran off a blitz spec r boot controller, guys please recommend me to what injectors yous think are good or even if yous have any, and alos prices would be good, not looking for something worth a fortune just something heaps gtr enthusiasts use and are happy with at the end of the day

note- injectors must be brand new

adjustable fuel reg can be second hand but in excellent condition and must be for my r32 gtr

thanks alot guys

cheers tony

N1GTR Grand Master

N1GTR

Posted
Posted

Done a search in the for sale section?

There's some injectors in there. Also JAGR33 is seling a SARD fuel reg

GTRBOS Mentor

GTRBOS

Posted
  • Author
Posted

hey guys my nismo injectors came today and they seem like they are in good condition, o-rings seem fine, by dropping thse injectors in will the car still drive like at;least normal, one of the mechanics i knwo are dropping the injectpors in and then straight away i need to drive the car to racepace in bayswater which is around 1hr away from here so will it be ok to drive yous think guys coz all i knwo is its gona run like shit and rich

cheers tony

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Chris' Toyota Mark ii JZX110

      By Dose Pipe Sutututu · Posted

      How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
×
×
  • Create New...