Jump to content
SAU Community

EBCs with scramble

Roy

By Roy,
in Engines & Forced Induction

 Share

Recommended Posts

Roy Grand Master

Roy

Posted
Posted

I have been using an Apexi AVC-R (blue screen) for about a year now and cannot fault the unit.

That said the scramble function allows you to set a boost level and an interval for that setting. I have never used this function and want to know if it is possible to set up so that as long as the scramble button is depressed the EBC will give the higher boost setting. (being so it activates whilst a button is depressed... not for say 6 seconds fter the button has been depressed)

I would rather not have to change EBCs, but i want to be able to run around a circuit at 10-12psi and when i hit the straight bump up boost to around 18-19psi.

Having to preset the scramble feature for a set interval means i can only use the scramble on say the main straight.

Thoughts???

Link to comment
https://www.sau.com.au/forums/topic/24434-ebcs-with-scramble/
Share on other sites
rb25 Grand Master

rb25

Posted
Posted

I have the HKS EVC4 and its really easy to set up like that, but the AVC-R - sorry I can't help you. Maybe try to get some decent product documentation from somewhere. Apex's manuals are ordinary. The guy I bought my EVC form was lucky enough to source the proper tuning/install manual from a HKS tuner direct. Aparently, the manual that comes with the EVC is 3 pages, but the one I have is 28 pages, very detailed.

T0nyGTSt Grand Master

T0nyGTSt

Posted
Posted

The people doing the work on my car (Bel Performance in Homebush 9763 7022) have hooked up a scramble button on the steering wheel for the AVC-R.

It should be cheap as it's just a momentary button.

I'm not sure I want one of those as I'd be tempted to "HIT IT" at every traffic light :)

T.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...