Jump to content
SAU Community

Recommended Posts

Firstly, it is impossible to get the original finish back. The only way to repair a front lip is to repair it via the method you spoke of (plastic welding) and then to prime and paint it.

I have been through this before. Painting is your only option. It is impossible to match that 'elephant scrotum' finish that is on the front lips from factory.

I have a MIDORI carbon fibre fron lower lip but it was damaged and repaired. It has to be primed and painted, but at the moment it is bogged and you can still see the carbon. I think they are about $1100 so you can have it for $400 if you want.

Oh yeah, also, Joe you are mistaken. Last time i checked with a genuine nissan dealer, a brand new genuine front lower lip for a BNR32 GTR was about $830, not the $490 that you claim.

PM me if interested.

Tom

Link to comment
https://www.sau.com.au/forums/topic/24455-32-gtr-bottom-lip/#findComment-522667
Share on other sites

BNR32, I have had this sort of repair done in Sydney. They can recoat the bar in a plastic finish that is actually heated onto the plastic after it has been plastic welded. The finish is as good as new and will not peel like paint will (and yes they can match the original black/grey colour)and the cost to do it is very reasonable. Nothing is impossible, you just need to know the right people.

The price for the lower lip is accurate as I've just bought one through nissan. The trick is to go to your local smash repairer and get them to order it in for you. They get a discount from nissan and you give them a case of crownies for there efforts. $830 for the lower lip is a bit overboard. I was quoted $560 to buy it over the counter, I think you should check again on that one.

Link to comment
https://www.sau.com.au/forums/topic/24455-32-gtr-bottom-lip/#findComment-523175
Share on other sites

My bar got repaired once and resprayed then damaged it again, this time the damage was a bit more serious then a scratch, so i decided to get different style front bar altogether

maybe something to consider

Link to comment
https://www.sau.com.au/forums/topic/24455-32-gtr-bottom-lip/#findComment-523268
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...