Jump to content
SAU Community

Recommended Posts

Hey guys,

Going to chuck my car up for sale to put some money into a new business. I have only owned this car for a few months and was planning on making it my daily slider, but going to go in a different direction now. It was built by a guy in Perth using all Jap brand parts (see below) and was bought by a mate of mine and I bought it off him recently. Since owning it I have fitted the Regamasters (in the pics) and started getting it ready for RWC by cleaning up the engine bay and painting a lot of stuff black to pass RWC :D

I am looking for $12,500 as it is about the value of the mods on the car. If it doesn't sell I will proceed with my plan and keep it, so if you low ball me you will get a lovely reply :D

EXTERIOR:

CA31 Chassis - July 1989 Build

Manual conversion

Final Konnexion Body Kit - Genuine Kit - Only kit of its kind in Australia!

M-Sports 30mm Flared & Vented Front Fenders - Genuine

Rear Guards Flared by 15mm

Full Respray in factory Diamond Black

Factory Sunroof

Late Model Tail Lights

Kaixon 6000k HID Headlight Kit

Legal Tint with Front Banner

Notes:

Bodykit was drifted by the guy I bought it off and is in good condition except for the rear passenger skirt but is an easy fix, just needs some glassing.

Drivers door has a scratch from when the front bar came off.

Small blemishes but otherwise excellent condition.

ENGINE:

RB20DET - Recently changed over after Bee*R limited destroyed a piston

HKS GT2835 Ball Bearing Turbo Kit (highflowed) ONLY 1500km since rebuild! (Went bang with old motor)

HKS Tuned Length Stainless Highmount Manifold

HKS 50mm Race Gate (1 Bar spring installed, other springs come with it)

Xtreme Chrome Moly 5.5kg Flywheel (6,000km old, new bolts used)

Xtreme 9 Puck 25% Over Standard Clutch (6,000km old)

SplitFire Coil Pack Kit for GTR (6,000km old & originals included)

R32 GTR Coilpack Loom (6,000km old)

Braided Lines where necessary, Fire Retardant Shields on All other Lines

ACL HeatSheild around Exhaust area

3" Dump Pipe w/ Heatwrap

3" Turbo Back Exhaust.

East Bear GTR Cooler Kit & Piping (original white cross pipe included)

Custom Stainless Intake Cross Pipe (By C-red Tuning)

R33 GTR VSpec Intercooler

Trust 50mm Race Blow Off Valve**

Trust 10 Row Oil Cooler w/ Braided Lines & Spin on Adaptor

Bosch O40 Fuel Pump with Source Power direct from Battery

Nissan Steel Exhaust Header Gasket w/ new Nissan Studs and Brass Nuts (6,000km old)

Quality Blue Silicon Used on all joins and bends

Silicon Vacuum Hoses

Silicon Radiator Hoses

Razor Grounding Kit

Oil Catch Can

Retuned Standard ECU - Socketed ROM (in Japan)

Had car dynoed recently and made 192rwkw on stock boost. Needs about 1.2bar to be efficient

DRIVETRAIN:

2-Way Mechanical Diff (Nice and quiet)

Gearbox Had 6 Bearings Replaced 6,000km ago

R32 Half Shafts installed

HPI Braided Clutch Line

Brand New Speedo Cable

UNDERNEATH:

Tein HA Coilovers (Purchased brand new in 04, 30,000km old now)

Tein Castor Rods

Castor Rod Mount Brace

Cusco Front Strut Brace

Adjustable Traction Rods in Rear

Adjustable Upper Arms in Rear

HICAS Lock Back

Drift Pineapples on Rear Cradle

Desmond Regamaster 17 x 8 (Lightweight) and 17 x 9.5

Brand new Falken 452 on the front and good tread Federal SS595's on the rear

Full 5 Stud Conversion, R32 Rear & Custom Billet Front Hubs

20mm 5 Stud Bolt on Hub Centric Spacers on Front

Z32 4 Pot Brakes & R32 2 Pot Rears in Red (replaced Rear Brake Lines)

S14 Steering Rack & Custom Power Steering Lines

INTERIOR:

Sexual dash mat (extremely rare!)

HKS EVC3 Boost Controller

Greddy Boost Guage

HKS Oil Temp, Water Temp & Oil Pressure Guages (all installed correctly)

6 Point Achieve Roll Cage

Nardi Turino Steering Wheel

Bride Zeta II (Driver)

Recaro replica with genuine BRIDE rail (Passenger)

Razo Gearknob

Pioneer MP3 Head Unit

Pioneer 6" Splits

That's the gist of it I think. Only been drifted a few times and has heaps of potential to make big power.

Car is fully complied and VIN plated fitted. Currently without rego, but as stated I was planning to register it but don't have the time, so would make an awesome street car or track slider.

I can be contacted on 0412 033 449. Located in Narre Warren.

PICS:

post-18824-1226875127_thumb.jpg post-18824-1226875153_thumb.jpg post-18824-1226875198_thumb.jpg post-18824-1226875219_thumb.jpg post-18824-1226875253_thumb.jpg

Cheers,

Ryan.

Link to comment
https://www.sau.com.au/forums/topic/245129-1989-nissan-cefiro-12500/
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
    • I NEVER think about using a scissor jack unless there is absolutely no other alternative. f**king things are dangerous, annoying and stupid.
×
×
  • Create New...