Jump to content
SAU Community

Recommended Posts

Hey guys n Chicks, Most Of you no my car, R33 s1, Anywhos, Whats the dealyoyo withthe hicas light coming on all the time? Only comes on when im doing between 80kms to 110kms - usualy on the FWY or on my way home on great northan hwy?? SHould i be freaking out?

Kels

Link to comment
https://www.sau.com.au/forums/topic/245284-why-is-my-hicas-light-turning-on/
Share on other sites

Mine did it a couple of times, apparently its nothing to be worried about. Happened to my dad a few times driving up and down the freeway on the way to work. However, I've been to your place a number of times now and my light hasnt come on in months.

hi im new here is your wheel-alignment straight? cuz ma cars wheel alignment was out b4 with da steering wheel off-centre n ma hicas light came on(happened on da freeway as well) n when i put it on da nissan consult tester it says no neutral signal at watever degrees n after i had ma wheel-alignment done it never came on

Edited by R33_NICK

hey sniper ( think you live round the corner from me ) . hicas light comes on to indicate that the hicas system has a fault and has been deactivated . on the r32 model i believe this could only happen after a certain distance of driving and above a certain speed . once the system is deactivated it stays as such until the motor is switched off .

so you have a fault . just rip it out , hicas is gay anyway

kermit 0422549050

Hey guys n Chicks, Most Of you no my car, R33 s1, Anywhos, Whats the dealyoyo withthe hicas light coming on all the time? Only comes on when im doing between 80kms to 110kms - usualy on the FWY or on my way home on great northan hwy?? SHould i be freaking out?

Kels

faulty steering wheel position sensor , steering wheel not centered correctly or no speed sensor input if you have an aftermarket steering wheel without a hicas compatible boss kit

it happens on the fwy because you have not moved your steering wheel in a while and there has been no steering input for the pre-determined amount of time to trigger the hicas error

very common search for more info if you need it

usualy on the FWY or on my way home on great northan hwy?? SHould i be freaking out?

just avoid the freeway or great northern highway and you'll be fine.

but in all seriousness this issue is regular and has been covered before. the forums are full of great information. it's there if you look for it :)

Chances are its the aftermarket steering wheel problem, exact same thing happens to my 32 i just ignore it.

Failing that 100 dollars for a lock bar and you can sort the problem out.

+1 for the aftermarket steering wheel causing the issues.

if you use the search feature you might find there's another thread on the forums on hicas issues.

Mmmm locker bar * thinks * hahaha that could be fun??? Yeah my wheel alignment was done like a month ago, its all straight, BUTTTTTT my steering wheel isnt, well after the alignment that is... Ino that i get a bit of humming in the rear end, but i presumed it was just my diff getting old... And yeah the light switches off when i turn the car off... Ino some times when i slow down like betweenn 20 - 40kms my steering gets really stiff and like impossible to turn, then go's away.... and i thawt that was hicas having a sad.... Thanks for your help guys, i now half understand hicas, i was starting to get a bit concernd haha!

Kermit - Lol No i dont live around the corner from you, i was at my mates :blink: I waved hahaha!!!

hmm power steering fluid.... that might explain the stiffness when you slow down if the hicas light is on, right? Going to Tenagah this friday, I'll get them to have a sqizz and tell me the issue cos Kelly you described the EXACT same problems I'm having!!

i read that thread Benson!! And I got confused as hell! I read the 'to hicas or not to hicas' thread and i was liek whaaaa

I've been best advised to just leave it in and stop crying about it lol

When r you going to Tenagah for the HICAS, Bens?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...