Jump to content
SAU Community

Rb25det S2 Basically Complete Engine $800

WHITE R32
 Share

Recommended Posts

WHITE R32 Grand Master

WHITE R32

Posted
Posted (edited)

hey guys i have a s2 rb25det from an r33 for sale

the engine was removed due to been low on compression for unknown reasons but as pictured the timing belt is still intact so thats a great sign!!! (no bent valves) i have not removed the head or the sump or anything to investigate the cause as i simply dont have the time so wanna just get rid of it!!!

the car arrived on a trailer and i removed the engine as it was already started to be removed so i have not seen it run nor did i try to run it but the engine is sold as a rebuilder with low compression

some parts from this engine were used on the new engine and vise versa so some parts are not on properly and are just sitting there such as top half of the intake throttle body rocker covers timing cover etc etc which wouldnt really matter as it would be rebuilt anyway

once again this engine is sold as a "rebuilder" so rebuild it into a forged thing for your car or build a cheap rb25/30 combo

comes with everything pictured but i also have a wiring loom ecu and coil cover which would also be available for extra of the buyer wants it

located in Toowoomba 1 hr west of brissy

$800 ONO complete with everything pictured, with bare 25 heads bringing 450ish i think this presents good value for a complete setup

may also trade for aftermarket parts for r32 gtr

may seperate and sell in parts if there is enough interest , thanks

post-1868-1227419610_thumb.jpg

post-1868-1227419619_thumb.jpg

post-1868-1227419629_thumb.jpg

post-1868-1227419642_thumb.jpg

post-1868-1227419654_thumb.jpg

Edited by WHITE R32
WHITE R32 Grand Master

WHITE R32

Posted
  • Author
Posted

hmmmm possibly yeah... so youd basically just want the complete intake manifold as unbolted from the head then?? pm me what you want where u are and what you are willing tp pay

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Will have a look at that. I cant see any leaks 
    • GTSBoy
      Coolant leak?

      By GTSBoy · Posted

      Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
    • Songo
      New kid on the block

      By Songo · Posted

      Hi Everyone I am from West Pennant Hills in NSW. Been too busy until recently to attend to my RB25DET Series 2 engine until recently. I am planning to stick it into the S15 shell at this stage, unless a nice SR20DET turns up... For now, i am going to try and get the RB25 running and working well then decide what gearbox to use. My preference is to retain the SR20DET  6 speed gearbox and tail shaft to retain as much and least modifications as i can avoid. I am an old guy and won't be doing any heavy drifting so i don't need a bullet proof gearbox Does anyone have experience with starting the RB on a stand? I got everything setup as much as I can with the info i can find... endless searching and videos on Youtube I would be great to get some pointers Cheers Songo
    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Hey all, Recently have had my s1 r33 gtr serviced and noticed my coolant reservoir was topped up to the max line. Took the car out for 1 yesterday and noticed today the reservoir is completely empty.  Any ideas? Radiator is full
×
×
  • Create New...